Stainless Steel Dental Ruler
The Stainless Steel Dental Ruler is a thin, flexible straight-edge marked in both centimetre (cm/mm) and inch scales along its face, with a hanging hole at the end for wall or tray storage. The satin-finished stainless steel is corrosion-resistant and resists glare under operatory lighting, letting the clinician or technician read measurements accurately during impression evaluation, model analysis, and wax-up work. The slim profile slips easily into diagnostic kits and cassette trays, and the stainless steel face is fully autoclavable for shared use between operatories. Supplied by Equate Instruments as a general-purpose dental measurement tool for orthodontic, prosthodontic, and oral-surgery workflows. Non-sterile for in-clinic steam sterilisation.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Dental Measuring Ruler 10 cm
The Dental Measuring Ruler 10 cm is a slim stainless-steel scale used chairside to measure paper points, gutta-percha cones, K-files and orthodontic wire with single-hand control. Millimetre and half-millimetre graduations are etched into the surface, giving a reliable reference for working-length measurement and malocclusion assessment. The rigid stainless-steel body resists bending under normal use and remains accurate over many autoclave cycles. The small top hole allows the ruler to hang from a tray hook or lanyard when not in use. Supplied non-sterile, it is a practical chairside measuring tool in the Equate Instruments range.
View
Dental Measuring Ruler 15 cm
The Dental Measuring Ruler 15 cm is a slim stainless-steel scale used chairside to measure paper points, gutta-percha cones, K-files and orthodontic wire with single-hand control. The longer 15 cm length extends to the full span of a long-file working length or a facial-arch wire segment, while the etched millimetre and half-millimetre graduations remain legible after repeated autoclaving. The rigid stainless-steel body resists bending in routine use, and a hanging hole at the top lets the ruler sit on a tray hook between cases. Supplied non-sterile, it is the longer chairside companion to the 10 cm ruler in the Equate Instruments range.
View
Dental Measuring Ruler 0-60mm
The dental measuring ruler is a thin, rigid stainless-steel blade etched with graduated millimetre markings along its working edge, giving clinicians a quick reference for intraoral and extraoral dimensional checks, including implant-site assessment, cast measurements, and radiographic references. Its low profile slips into tight working spaces without distorting soft tissue or interfering with adjacent structures. The polished surface stays legible across repeated sterilisation cycles, and the instrument is fully autoclavable. Supplied non-sterile by Equate Instruments for in-office steam processing in pouches or cassettes.
View
Dental Measuring Ruler 0-60mm Square Edge
The dental measuring ruler is a thin, rigid stainless-steel blade etched with graduated millimetre markings along its working edge, giving clinicians a quick reference for intraoral and extraoral dimensional checks, including implant-site assessment, cast measurements, and radiographic references. Its low profile slips into tight working spaces without distorting soft tissue or interfering with adjacent structures. The polished surface stays legible across repeated sterilisation cycles, and the instrument is fully autoclavable. Supplied non-sterile by Equate Instruments for in-office steam processing in pouches or cassettes.
View
Dental Measuring Ruler 0-80mm
The dental measuring ruler is a thin, rigid stainless-steel blade etched with graduated millimetre markings along its working edge, giving clinicians a quick reference for intraoral and extraoral dimensional checks, including implant-site assessment, cast measurements, and radiographic references. Its low profile slips into tight working spaces without distorting soft tissue or interfering with adjacent structures. The polished surface stays legible across repeated sterilisation cycles, and the instrument is fully autoclavable. Supplied non-sterile by Equate Instruments for in-office steam processing in pouches or cassettes.
View
Deluxe Boley Gauge
The Deluxe Boley Gauge is a precision stainless-steel dental caliper calibrated in millimetres for measuring tooth widths, crown heights, prosthetic teeth and orthodontic study models. The pointed sliding jaw reads against the main scale from 0 to 80 mm, while a vernier track on the auxiliary jaw adds fine tenth-millimetre resolution for close work. Fabricated from hardened stainless steel by Equate Instruments, the gauge holds its calibration through repeated autoclave cycles and routine chemical disinfection. The pointed tips reach into interproximal contacts and embrasures where standard rulers cannot.
View
Vernier Dental Caliper 130mm
This dental caliper is a precision measuring instrument used to gauge tooth widths, arch-form dimensions, wax patterns, and study-model landmarks. The scale reads directly in millimetres so the clinician can capture accurate linear measurements chairside or on the bench during case planning and fabrication. Crafted in stainless steel with a fully autoclavable body, this Equate Instruments caliper is built for daily reuse across restorative, prosthodontic, and orthodontic workflows. Supplied non-sterile, it is ready for routine in-clinic sterilisation between measurements.
View
Boley Dental Caliper 145mm
This dental caliper is a precision measuring instrument used to gauge tooth widths, arch-form dimensions, wax patterns, and study-model landmarks. The scale reads directly in millimetres so the clinician can capture accurate linear measurements chairside or on the bench during case planning and fabrication. Crafted in stainless steel with a fully autoclavable body, this Equate Instruments caliper is built for daily reuse across restorative, prosthodontic, and orthodontic workflows. Supplied non-sterile, it is ready for routine in-clinic sterilisation between measurements.
View
Dental Caliper 0-90 mm
This dental caliper is engineered for accurate linear measurement of teeth, restorations, and stone models. The stainless-steel shaft carries a clearly etched scale graduated from zero to ninety millimetres, and a knurled thumb-screw collar locks the sliding indicator at the measured position. A short offset reference beak at the tip lets the clinician register a stable contact point on the working surface. Built from corrosion-resistant stainless steel and fully autoclavable, this caliper is a trusted daily measurement tool for orthodontists, prosthodontists, and dental technicians. Equate Instruments supplies it non-sterile for the clinic's preferred sterilisation workflow.
View
Iwanson Caliper for Wax 10 mm
The Iwanson spring caliper is a precision instrument used by dental technicians and prosthodontists to measure the thickness of wax patterns, metal copings, ceramic build-ups and thin sheet materials. The sprung arms follow the contour of the work piece, and the curved jaws close onto the measurement point while the scale reads directly on the arc from 0 to 10 mm. Crafted by Equate Instruments from stainless steel for stable spring tension, the caliper is autoclavable and tolerates routine lab solvents. A 1/10 mm track supports tenth-millimetre resolution for crown thickness checks.
View
Iwanson Wax Thickness Caliper (0-10 mm)
The Iwanson Wax Thickness Caliper is a spring-loaded dental gauge used to measure the thickness of wax patterns, metal copings, crowns, and thermoformed splints. The pivoting arms carry two slim pointed tips that clip over the material, and a curved graduated scale reads from 0 to 10 mm in 1/10 mm (0.1 mm) increments for precise laboratory control. A light spring keeps constant measurement pressure between the tips so readings stay reproducible across operators, and the open-frame design lets the technician sight the scale without obscuring the workpiece. Stainless-steel construction with laser-etched graduations, fully autoclavable, and supplied non-sterile. A core laboratory measuring tool from Equate Instruments.
View
Dental Caliper Compass - Dual C-Arm
The Dental Caliper Compass is a dual C-arm measuring instrument used in the dental laboratory and orthodontic clinic to transfer interior or exterior dimensions between study models, dies, and impressions. Two mirrored C-shaped arms pivot around a central knurled screw, so the technician can reach inside a crown or between abutments while the outer tips reference the opposing landmark. The hollow frame design keeps the instrument light and the scale field unobstructed, and the central screw locks the spread so a measurement can be carried to a ruler or directly to the next workpiece. Stainless-steel construction, fully autoclavable, and supplied non-sterile. A classic transfer caliper from Equate Instruments.
View
