Sanders Knife 1/2 - Solid Handle 6 mm
This double-ended Sanders 1/2 interdental knife features slender angled blades designed to reach mesial and distal embrasures during periodontal flap surgery. The paired tip geometry allows clean vertical releasing incisions and papilla preservation in anterior and premolar regions, complementing broader gingivectomy knives during layered soft-tissue procedures. The instrument is machined from high-grade stainless steel and fitted with a knurled solid 6 mm handle for steady grip through extended surgical appointments. Supplied non-sterile and fully autoclavable, it integrates into standard periodontal surgical cassettes and supports clinicians managing tight interdental soft-tissue architecture.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Sanders Knife 4/5 - Solid Handle 6 mm
This double-ended Sanders 4/5 interdental knife features slender angled blades with alternate angulations to the 1/2 pair, providing complementary access to opposite mesial and distal embrasures. The paired tips support clean vertical releasing incisions and papilla preservation across the posterior dentition during periodontal flap surgery. The instrument is machined from high-grade stainless steel and fitted with a knurled solid 6 mm handle for steady grip through extended surgical procedures. Supplied non-sterile and fully autoclavable, it integrates into standard periodontal surgical cassettes and pairs with the Sanders 1/2 for complete interdental coverage.
View
Widman Curved Periodontal Knife
The Widman Curved Periodontal Knife is a single-ended surgical knife designed for internal bevel incisions and flap design during periodontal flap procedures, including the modified Widman flap technique. The slim, curved, spear-shaped blade follows the contour of the gingival margin and can reach around tooth forms to produce controlled scalloped incisions through attached gingiva and papilla. The knurled stainless-steel handle is lightweight and balanced for fine-motor knife work. Fully autoclavable and supplied non-sterile by Equate Instruments, the knife integrates into periodontal surgery trays alongside Orban, Kirkland, and Buck-style knives.
View
Hylin-LeCron Wax Carver 2.5 mm - Light Blue Silicone Handle
The Hylin-LeCron wax carver is a double-ended modelling instrument designed for carving, contouring, and detailing wax patterns in crown, bridge, and denture work. The two working ends are ground for complementary tasks - one for shaping and scooping wax volume, the other for paring margins and sweeping away excess material - letting the technician complete both rough and fine moves without switching tools. The stainless-steel working ends sit on a lightweight silicone-sleeved handle with a textured grip profile, giving a fatigue-resistant, confident hold during long waxing sessions. Both working ends and the handle sleeve are autoclavable, so the instrument moves between the lab bench and sterilisation cycle without degradation.
View
Hylin-LeCron Wax Carver 3.0 mm - Light Blue Silicone Handle
The Hylin-LeCron wax carver is a double-ended modelling instrument designed for carving, contouring, and detailing wax patterns in crown, bridge, and denture work. The two working ends are ground for complementary tasks - one for shaping and scooping wax volume, the other for paring margins and sweeping away excess material - letting the technician complete both rough and fine moves without switching tools. The stainless-steel working ends sit on a lightweight silicone-sleeved handle with a textured grip profile, giving a fatigue-resistant, confident hold during long waxing sessions. Both working ends and the handle sleeve are autoclavable, so the instrument moves between the lab bench and sterilisation cycle without degradation.
View
Flexible Laboratory Knife 18 cm - Wooden Handle
A slim 18 cm laboratory knife with a deliberately flexible, tapered stainless-steel blade and a turned hardwood handle fitted with a brass ferrule. The flexible blade conforms against plaster models, wax-up contours and alginate surfaces for delicate trimming, adapting wax and cleaning edges without gouging the underlying material. The balanced, tapered wooden handle sits comfortably in a pen grip for long, controlled bench sessions, and the brass ferrule protects the join between blade and handle from splitting. Manufactured from polished stainless steel by Equate Instruments for dental technicians who prefer a delicate knife alongside heavier plaster tools.
View
Zahle Wax Carver - Solid Stainless Handle 6 mm
The Zahle wax carver is a double-ended modelling instrument for shaping, contouring, and finishing wax patterns in the dental laboratory. Both working ends are ground to complement each other - one for defining occlusal anatomy and surface texture on wax-ups, the other for trimming bulk wax and sweeping away flash before investing. The instrument is built from stainless steel throughout, with a 6 mm solid handle and a knurled centre band that stays secure even when fingers pick up a film of wax or oil. The polished working ends hold a reliable edge and, together with the corrosion-resistant handle, withstand routine steam sterilisation between cases.
View
Zahle Wax Carver - Solid Stainless Handle 6 mm
The Zahle wax carver is a double-ended modelling instrument for shaping, contouring, and finishing wax patterns in the dental laboratory. Both working ends are ground to complement each other - one for defining occlusal anatomy and surface texture on wax-ups, the other for trimming bulk wax and sweeping away flash before investing. The instrument is built from stainless steel throughout, with a 6 mm solid handle and a knurled centre band that stays secure even when fingers pick up a film of wax or oil. The polished working ends hold a reliable edge and, together with the corrosion-resistant handle, withstand routine steam sterilisation between cases.
View
Hylin-LeCron Wax Carver - Solid Stainless Handle 6 mm
The Hylin-LeCron wax carver is a double-ended modelling instrument designed for carving, contouring, and detailing wax patterns in crown, bridge, and denture work. The two working ends are ground for complementary tasks - one for shaping and scooping wax volume, the other for paring margins and sweeping away excess material - letting the technician complete both rough and fine moves without switching tools. This version has an all stainless-steel solid handle with a knurled centre band for a secure, slip-resistant grip during extended waxing sessions. The balanced handle and polished working ends resist corrosion and withstand routine steam sterilisation cycles, so the instrument is ready for heavy lab-bench use.
View
Hylin-LeCron Wax Carver - Solid Stainless Handle 6 mm
The Hylin-LeCron wax carver is a double-ended modelling instrument designed for carving, contouring, and detailing wax patterns in crown, bridge, and denture work. The two working ends are ground for complementary tasks - one for shaping and scooping wax volume, the other for paring margins and sweeping away excess material - letting the technician complete both rough and fine moves without switching tools. This version has an all stainless-steel solid handle with a knurled centre band for a secure, slip-resistant grip during extended waxing sessions. The balanced handle and polished working ends resist corrosion and withstand routine steam sterilisation cycles, so the instrument is ready for heavy lab-bench use.
View
Goldman-Fox Knife 7 - Solid Handle 6 mm
This double-ended Goldman-Fox 7 periodontal knife features kidney-shaped cutting blades engineered for gingivectomy, gingivoplasty and pocket-wall excision during periodontal flap surgery. The paired blade angulations allow clean soft-tissue incisions along both the buccal and lingual aspects of the dentition, with sharp cutting edges that support reproducible bevels and minimal tissue tearing. The instrument is machined from high-grade stainless steel and fitted with a knurled solid 6 mm handle for steady grip through extended surgical procedures. Supplied non-sterile and fully autoclavable, it integrates into standard periodontal surgical cassettes and is a reliable choice for periodontists managing pocket reduction and soft-tissue contouring.
View
Goldman-Fox Knife 8 - Solid Handle 6 mm
This double-ended Goldman-Fox 8 periodontal knife features pointed flame-shaped blades engineered for interdental gingivectomy and pocket-wall excision. The paired narrow angulations reach into interproximal embrasures where kidney-shaped blades cannot, supporting precise soft-tissue contouring around papillae and tight contact areas during flap surgery. The instrument is machined from high-grade stainless steel and fitted with a knurled solid 6 mm handle for steady grip through extended surgical procedures. Supplied non-sterile and fully autoclavable, it integrates into standard periodontal surgical cassettes and complements the kidney-bladed Goldman-Fox 7 for comprehensive gingivectomy coverage.
View
Goldman-Fox Knife 9 - Solid Handle 6 mm
This double-ended Goldman-Fox 9 periodontal knife features slender curved cutting blades engineered for fine gingivoplasty and soft-tissue contouring during periodontal surgery. The paired angulations allow controlled bevelled incisions along the free gingival margin, supporting reproducible tissue recontouring around restorations, implants and pontic sites. The instrument is machined from high-grade stainless steel and fitted with a knurled solid 6 mm handle for steady grip through delicate soft-tissue manoeuvres. Supplied non-sterile and fully autoclavable, it integrates into standard periodontal surgical cassettes and is well suited to clinicians managing subtle gingival aesthetics.
View
