Orban Interdental Knife - Solid Handle 6 mm
The Orban Interdental Knife with 6 mm Solid Handle is a double-ended periodontal knife used for papilla dissection, interdental gingivectomy, and excision of interproximal soft tissue prior to flap reflection. The opposing angled crescent blades reach buccal and lingual papillae through a single grip, and the spear-shaped ground edge delivers a clean incision through keratinised gingiva. The 6 mm solid handle is finely cross-serrated along its length for a steady wet grip during controlled cutting strokes. Machined from corrosion-resistant stainless steel, the knife is fully autoclavable and supplied non-sterile by Equate Instruments for in-office sterilisation.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Orban Gingivectomy Knife Fig. 1/2 - Titanium Plasma Blue, 6 mm Solid Handle
The Orban Fig. 1/2 is a double-ended gingivectomy knife with mirror-image spear-shaped blades designed for interdental soft-tissue incisions. The fine lateral cutting edges contour through papillary and interproximal gingiva so the clinician can perform festooning, crown lengthening and interdental gingival recontouring with controlled depth. The 6 mm solid stainless-steel handle is knurled for a confident wet grip, and the blades carry a titanium plasma blue finish that resists corrosion and provides high visual contrast against soft tissue. Equate Instruments supplies the knife non-sterile for in-clinic steam sterilisation in pouches or cassettes.
View
Orban Interdental Knife - Anatomical Hollow Handle 10 mm
The Orban Interdental Knife with 10 mm Hollow Handle is a double-ended periodontal knife for papilla dissection and interproximal gingivectomy, ground on the same classic Orban angulation as its solid-handle sibling. Opposing curved crescent blades reach buccal and lingual aspects of each papilla through a single grip, and the spear-ground edge delivers a clean incision through keratinised gingiva. The 10 mm anatomical hollow handle is knurled and noticeably lighter than a solid equivalent, so the operator retains tactile feedback through thin mucosa during long gingivectomy sessions. Machined from stainless steel and fully autoclavable, the instrument is supplied non-sterile by Equate Instruments.
View
Kirkland Gingivectomy Knife Fig. 15K/16K - Titanium-Coated Solid Handle
The Kirkland Gingivectomy Knife Fig. 15K/16K is a periodontal surgical knife built for the initial bevel incision in gingivectomy and gingivoplasty procedures. The double-ended working tips present mirrored kidney-shaped blades with keen cutting edges that let the clinician follow the gingival margin on facial and lingual surfaces in a single pass. The reverse-action geometry gives reliable access to posterior retro-molar regions where visibility is limited. Finished with a titanium nitride-style coating over stainless steel, the blades show a deep plasma-blue hue that reduces operatory glare. The solid handle with coloured tactile rings offers a secure grip through long soft-tissue procedures, and the instrument is fully autoclavable. Equate Instruments hand-finishes each edge for consistent geometry across reprocessing cycles.
View
Kirkland 13K/14K Gingivectomy Knife - Hollow Handle
The Kirkland 13K/14K Gingivectomy Knife is a periodontal surgical knife used to make the initial bevel incision during gingivectomy and gingivoplasty. Its mirrored kidney-shaped blades on opposite ends follow the gingival margin on both facial and lingual surfaces in a single pass, and the reverse-action geometry reaches the retro-molar region where visibility is limited. The sharp peripheral edges remove excess soft tissue and contour gingival architecture predictably. Each blade is machined from surgical-grade stainless steel and mounted on a lightweight hollow handle with colour-coded tactile rings for a confident wet grip. The instrument is fully autoclavable and supplied non-sterile for in-clinic sterilisation. Equate Instruments hand-finishes each cutting edge for consistent geometry across reprocessing cycles.
View
Kirkland 13K-TG Gingivectomy Knife - Solid Handle 6mm
The Kirkland 13K-TG is a double-ended gingivectomy knife designed for external bevel incisions during pocket elimination surgery. Its paired curved blades carry active cutting edges that excise excess gingival tissue and sculpt the free gingival margin to a physiologic contour. The knife is crafted from stainless steel with a 6 mm knurled solid handle for balanced control during sweeping incision strokes. Fully autoclavable and supplied non-sterile by Equate Instruments, it is ready for steam sterilisation in pouches or cassettes.
View
Kirkland Knife - Solid Handle 6mm
The Kirkland Knife is a double-ended periodontal knife with kidney-shaped blades used for gingivectomy and gingivoplasty procedures. Its continuous cutting edge follows the external bevel required to resect pocket tissue around anterior and premolar teeth, producing a clean contour that supports healing by primary intent. The blades sit on a 6 mm solid stainless-steel handle with full-length knurling for a stable, rotatable grip during bevel cutting. Supplied by Equate Instruments as a one-piece stainless instrument, it is fully autoclavable and works with standard cassette-based sterilisation workflows.
View
Hirschfeld File 3/7 - Anatomical Solid Handle 6 mm
The Hirschfeld File 3/7 is a double-ended periodontal file with small, gently curved working ends carrying fine parallel grooves for calculus crushing and root-surface smoothing. The 3/7 angulation pair is intended for posterior buccal and lingual access, letting the clinician finish areas that a curette has roughed out. The file sits on a 6 mm solid stainless-steel anatomical handle with full-length knurling for a stable modified pen grip. Supplied by Equate Instruments as a one-piece stainless instrument, it is fully autoclavable and integrates cleanly with standard cassette-based sterilisation.
View
Hirschfeld File 5/11 - Anatomical Solid Handle 6 mm
The Hirschfeld File 5/11 is a double-ended periodontal file with fine grooved working ends angled to reach mesial and distal root surfaces that a 3/7 cannot adapt to. The pull-stroke action crushes tenacious calculus and smooths the root after primary scaling, reducing plaque-retentive roughness before the final polish. The file carries a 6 mm solid stainless-steel anatomical handle with full-length knurling for a stable modified pen grip. Supplied by Equate Instruments as a one-piece stainless instrument, it is fully autoclavable and works with standard cassette-based sterilisation.
View
Hirschfeld File No. 9 - Solid Handle 6mm
The Hirschfeld File No. 9 is a double-ended periodontal file with small grooved working ends tuned for finishing root surfaces after heavy scaling. The pull-stroke action crushes residual calculus and smooths the root face, reducing plaque retention ahead of final polishing and supporting tissue reattachment after non-surgical therapy. Both tips are mounted on a 6 mm solid stainless-steel handle with full-length knurling for a stable modified pen grip. Supplied by Equate Instruments as a one-piece stainless instrument, it is fully autoclavable and fits standard cassette-based sterilisation workflows.
View
Sugarman File 1S/2S - Solid Handle 6 mm
This double-ended Sugarman 1S/2S periodontal file is engineered for fine interproximal work during periodontal surgery and post-scaling refinement. The slender tapered working ends access tight embrasures to smooth residual calculus remnants and remove small overhanging restorative margins that larger instruments cannot reach. The instrument is machined from high-grade stainless steel and fitted with a knurled solid 6 mm handle for stable tactile control during delicate bone and root-surface refinement. Supplied non-sterile and fully autoclavable, it slots into standard periodontal surgical cassettes and is a useful adjunct for periodontists managing interdental soft and hard tissues.
View
Sugarman File 3S/4S - Solid Handle 6 mm
This double-ended Sugarman 3S/4S periodontal file is engineered for fine interproximal refinement during periodontal surgery and post-scaling finishing. The slender tapered tips at slightly different angulations from the 1S/2S pair provide complementary access to mesial and distal embrasures, allowing smoothing of residual calculus and minor osseous irregularities in tight interdental zones. The instrument is machined from high-grade stainless steel and fitted with a knurled solid 6 mm handle for stable tactile control during delicate bone and root-surface work. Supplied non-sterile and fully autoclavable, it integrates into standard periodontal surgical cassettes and complements the 1S/2S pair for complete interproximal coverage.
View
Schluger File 9/10 - Solid Handle 6 mm
This double-ended Schluger 9/10 periodontal bone file features serrated working surfaces on one end and a fine hoe-like tip on the other, engineered for interproximal bone recontouring during periodontal and osseous surgery. The angulated shanks reach mesial and distal alveolar crests, while the file teeth efficiently smooth bony ledges left after primary osteotomy. The instrument is machined from high-grade stainless steel and fitted with a knurled solid 6 mm handle for stable tactile control during delicate osseous work. Supplied non-sterile and fully autoclavable, it integrates into standard periodontal surgical cassettes and remains a staple for periodontists performing osseous resective therapy.
View
