Non-Stick Packer-Modeller
The Non-Stick Packer-Modeller is a double-ended filling instrument with two conical working tips designed to condense and shape direct composite. The conical geometry lets the operator pack material cleanly into Class I, II, and III preps and then shape the occlusal or proximal surface in the same pass. A titanium non-stick coating on both tips helps the composite release from the instrument instead of pulling out of the cavity, which supports smooth layering and predictable anatomy. The cushioned silicone grip handle gives a stable pen grasp during long restorative appointments, and the fully autoclavable body returns to service after standard reprocessing.
Specifications
MaterialTitaniumRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Composite Knife / Carver - Non-Stick Double-Ended
This double-ended composite knife and carver is designed for removing excess material and defining anatomy during direct restorative procedures. One end is a fine curved knife-style tip for trimming interproximal flash and refining margins, while the other is an angled flat carver for sculpting cusps and grooves before light-curing. Both tips carry a non-stick coating so composite releases cleanly during carving, reducing pull-out of set or semi-set material. The stainless-steel body is mounted on a knurled hollow handle with gold accent rings for a balanced tactile grip. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
View
Plastic Instrument (Anterior) - Non-stick Titanium Coated
The Non-stick Plastic Instrument is a double-ended composite placement instrument designed for packing, contouring, and shaping light-cure composite resin during direct restorations. Titanium-nitride-coated working tips give a hard, low-friction surface that releases composite cleanly without dragging or pulling, while the slender blade profiles adapt precisely to cavity margins, interproximal boxes, and anatomic contours. The body pairs a stainless-steel core with a soft silicone ergonomic grip that reduces hand fatigue during extended restorative appointments. Angulated tips are shaped to suit a specific arch region so the instrument places composite with controlled pressure and a natural wrist angle. Equate Instruments supplies this instrument non-sterile and fully autoclavable for high-volume composite workflows.
View
Mini Non-Stick Composite Spatula
The Mini Non-Stick Composite Spatula is a double-ended placement instrument with two small curved tips sized for Class I, II, and V composite restorations. Its slim working ends let the operator introduce flowable or paste composite into narrow occlusal pits, Class III boxes, and cervical cavities without overbulking the restoration. A titanium non-stick coating on both tips minimises composite drag so material releases cleanly from the instrument instead of lifting out of the cavity. The cushioned silicone grip handle gives a fatigue-free pen grasp during layering, and the body is fully autoclavable for routine reprocessing between patients.
View
Plastic Instrument (Posterior) - Non-stick Titanium Coated
The Non-stick Plastic Instrument is a double-ended composite placement instrument designed for packing, contouring, and shaping light-cure composite resin during direct restorations. Titanium-nitride-coated working tips give a hard, low-friction surface that releases composite cleanly without dragging or pulling, while the broader blade profiles adapt firmly to occlusal anatomy, marginal ridges, and posterior cavity walls. The body pairs a stainless-steel core with a soft silicone ergonomic grip that reduces hand fatigue during extended restorative appointments. Angulated tips are shaped to suit a specific arch region so the instrument places composite with controlled pressure and a natural wrist angle. Equate Instruments supplies this instrument non-sterile and fully autoclavable for high-volume composite workflows.
View
Non-Stick Composite Modeller
The Non-Stick Composite Modeller is a double-ended instrument with two cylindrical working tips for shaping and packing direct composite. The cylindrical end glides smoothly over setting composite without catching or leaving impressions, so the clinician can define cusp form and marginal ridge anatomy before light-curing. Both tips carry a titanium non-stick coating so material releases cleanly from the instrument instead of pulling out of the cavity, and the cushioned silicone grip handle gives a stable pen grasp during layered restorations. The lightweight, non-magnetic body is fully autoclavable and returns to service after standard reprocessing.
View
Universal Non-Stick Composite Spatula
The Universal Non-Stick Composite Spatula is a double-ended placement instrument with two differently shaped tips that cover most direct-composite placement steps in one instrument. One end is a slim curved blade for introducing material into narrow preparations, and the other is a broader flat paddle for spreading and adapting composite across a cavity floor. Both tips carry a titanium non-stick coating so composite releases cleanly from the spatula instead of pulling out of the cavity, which supports consistent layering and predictable anatomy. The cushioned silicone grip handle provides a stable pen grasp through multi-increment restorations, and the lightweight body is fully autoclavable for routine in-clinic reprocessing.
View
Plastic Instrument (Anterior)
This double-ended composite placement instrument from Equate Instruments delivers controlled handling and shaping of light-cure resin composite during direct restorations. Both working ends carry a dark non-stick finish formulated to resist adhesion of unset resin, allowing clean adaptation against cavosurface margins, layered build-ups, and interproximal contours without drag or pull on the material. A stainless steel core provides the rigidity needed for condensation and shaping strokes while tapered working tips preserve sensitivity at the cavity wall. The instrument is mounted on an ergonomic silicone-sleeved handle that gives a confident wet grip during extended procedures. It is autoclavable and supplied non-sterile for in-office steam sterilisation and routine reuse.
View
Mini Composite Spatula
This double-ended composite placement instrument from Equate Instruments delivers controlled handling and shaping of light-cure resin composite during direct restorations. Both working ends carry a dark non-stick finish formulated to resist adhesion of unset resin, allowing clean adaptation against cavosurface margins, layered build-ups, and interproximal contours without drag or pull on the material. A stainless steel core provides the rigidity needed for condensation and shaping strokes while tapered working tips preserve sensitivity at the cavity wall. The instrument is mounted on an ergonomic silicone-sleeved handle that gives a confident wet grip during extended procedures. It is autoclavable and supplied non-sterile for in-office steam sterilisation and routine reuse.
View
Plastic Instrument (Posterior)
This double-ended composite placement instrument from Equate Instruments delivers controlled handling and shaping of light-cure resin composite during direct restorations. Both working ends carry a dark non-stick finish formulated to resist adhesion of unset resin, allowing clean adaptation against cavosurface margins, layered build-ups, and interproximal contours without drag or pull on the material. A stainless steel core provides the rigidity needed for condensation and shaping strokes while tapered working tips preserve sensitivity at the cavity wall. The instrument is mounted on an ergonomic silicone-sleeved handle that gives a confident wet grip during extended procedures. It is autoclavable and supplied non-sterile for in-office steam sterilisation and routine reuse.
View
Universal Composite Spatula
This double-ended composite placement instrument from Equate Instruments delivers controlled handling and shaping of light-cure resin composite during direct restorations. Both working ends carry a dark non-stick finish formulated to resist adhesion of unset resin, allowing clean adaptation against cavosurface margins, layered build-ups, and interproximal contours without drag or pull on the material. A stainless steel core provides the rigidity needed for condensation and shaping strokes while tapered working tips preserve sensitivity at the cavity wall. The instrument is mounted on an ergonomic silicone-sleeved handle that gives a confident wet grip during extended procedures. It is autoclavable and supplied non-sterile for in-office steam sterilisation and routine reuse.
View
Titanium Ball Burnisher 2.0/2.5 mm - Gold-Coated Tips, Solid Handle
This Titanium Ball Burnisher is a double-ended restorative hand instrument for adapting and smoothing light-cured composite restorations. Its 2.0 mm and 2.5 mm ball working ends are treated with a plasma gold coating that reduces stickiness with unset composite and minimises resin drag during burnishing. The titanium body is lightweight and resists corrosion, while the 6 mm solid knurled handle delivers a balanced tactile grip across long restorative appointments. Equate Instruments supplies the instrument as a reusable autoclavable tool, delivered non-sterile for in-clinic steam sterilisation in pouches or cassettes.
View
Filling Instrument C49
The C49 filling instrument is a double-ended restorative hand instrument for carrying, compacting, and contouring plastic restorative materials at the cavity site. Each working end offers a small angled flat-face paddle with a titanium-nitride coating that resists sticking to amalgam, glass-ionomer, and composite alike, so material releases cleanly from the blade and remains on the restoration. The dual angulation handles both buccal and lingual approaches without rotating between instruments. A lightweight hollow handle with alternating colour-coded bands offers a high-tactility wet grip and clear chairside identification on a busy tray. This Equate Instruments instrument is built for fully autoclavable reprocessing and supplied non-sterile for standard cassette handling.
View
