Flexible Plaster Spatula 16 cm Green Handle
The Flexible Plaster Spatula is a knife-style hand instrument used in dental laboratories and chairside to mix, spread, and carve gypsum-based materials. A thin flexible stainless-steel blade tapers to a rounded tip and is ground flat on both faces so plaster and dental stone release cleanly off the blade when drawn across a slab. A contoured hardwood handle is riveted to the tang with two brass pins, giving a balanced grip for extended mixing sessions. The 16 cm working length suits single-tooth dies as well as larger diagnostic model work. Equate Instruments supplies this spatula for routine laboratory use; the blade tolerates chemical disinfection while the wooden handle is intended for wipe-down cleaning rather than steam autoclaving.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Gritmann Plaster Knife 16 cm - Wooden Handle
A classic Gritmann plaster knife sized at 16 cm and fitted with a riveted natural-wood handle. The rounded, curved stainless-steel blade trims set plaster, stone and alginate models cleanly and is equally suited to carving wax and bite registrations on the bench. The broad sweep of the blade edge lets the technician shave material in long controlled strokes without gouging. The heat- and moisture-tolerant wooden handle is riveted through the blade tang for a stable, long-wearing grip. Manufactured from carbon-stable stainless steel by Equate Instruments, the knife is a daily-driver laboratory tool for model trimmers, prosthodontic technicians and general dental labs. Supplied clean and ready for normal lab hygiene protocols.
View
Gritmann Plaster Knife 16 cm - Green Wood-Textured Handle
A Gritmann plaster knife sized at 16 cm and fitted with a green wood-textured composite handle. The rounded, curved stainless-steel blade trims set plaster, stone and alginate models cleanly and also carves wax and bite registrations on the bench. The broad blade edge lets the technician shave material in long controlled strokes, and the patterned grip surface resists slip even when the hand is wet with plaster slurry. The handle material tolerates heat, moisture and routine wipe-down disinfection, and the blade is manufactured from carbon-stable stainless steel by Equate Instruments. A durable daily-driver knife for model trimmers and general dental labs.
View
Laboratory Plaster Knife 18 cm - Wooden Handle
An 18 cm laboratory plaster knife with a long, curved stainless-steel blade and a riveted natural-wood handle. The extended blade length gives the technician the reach and sweep needed for trimming larger plaster and stone models, beading impressions and shaving wax patterns on the bench. The shallow curve finishes in a pointed tip for detail work in corners and undercuts. The wooden handle is fastened through the blade tang with multiple rivets for a stable, fatigue-free grip that tolerates heat and moisture during busy lab sessions. Manufactured from carbon-stable stainless steel by Equate Instruments and supplied clean for routine laboratory hygiene protocols.
View
Laboratory Plaster Knife 18 cm - Green Wood-Textured Handle
An 18 cm laboratory plaster knife with a long, curved stainless-steel blade and a green wood-textured composite handle. The extended blade length provides the reach and sweep needed to trim larger plaster and stone models, bead impressions and shave wax patterns on the bench. The shallow curve finishes in a pointed tip for detail work in corners and undercuts. The patterned composite grip resists slip even when the hand is wet with plaster slurry, and the handle material tolerates routine moisture and wipe-down disinfection. Manufactured from carbon-stable stainless steel by Equate Instruments as a durable daily-driver for dental laboratories.
View
Flexible Plaster Spatula 16 cm
The Flexible Plaster Spatula is a knife-style hand instrument used in dental laboratories and chairside to mix, spread, and carve gypsum-based materials. A thin flexible stainless-steel blade tapers to a rounded tip and is ground flat on both faces so plaster and dental stone release cleanly off the blade when drawn across a slab. A contoured hardwood handle is riveted to the tang with two brass pins, giving a balanced grip for extended mixing sessions. The 16 cm working length suits single-tooth dies as well as larger diagnostic model work. Equate Instruments supplies this spatula for routine laboratory use; the blade tolerates chemical disinfection while the wooden handle is intended for wipe-down cleaning rather than steam autoclaving.
View
Lichtenstein Plaster Mixing Spatula 17 cm
A Lichtenstein plaster spatula sized at 17 cm and manufactured entirely from polished stainless steel in a single double-ended form. Each end finishes in a broad, rounded blade that mixes and spreads plaster, alginate and stone slurry inside rubber mixing bowls with smooth, air-reducing strokes. A central open slot runs down the shaft, lightening the instrument and giving the technician extra grip purchase when the surface is wet. The symmetrical one-piece construction has no seams or rivets to trap material and is fully autoclavable, which makes it a straightforward workhorse for mixing impression and model materials. Produced by Equate Instruments from corrosion-resistant stainless steel.
View
Flexible Plaster Spatula - Wooden Handle 19.5cm
The Flexible Plaster Spatula is a 19.5 cm dental laboratory instrument used for mixing alginate, dental stone, plaster and investment materials in a rubber bowl. Its flexible rounded stainless-steel blade bends cleanly against the bowl wall to sweep material into a homogeneous mix without trapping air, and the broad flat face also transfers mix into impression trays or ring formers with a smooth, clean release. The stainless blade is fixed into a contoured hardwood handle with two brass rivets, giving the technician a warm, non-slip grip that resists wet-handling fatigue during successive mixes. Hand-wash and air-dry to preserve the wood; the blade itself is corrosion-resistant stainless steel suitable for routine laboratory service.
View
Spatula Flexible 19.5 cm with Yellow Plastic Handle
The 19.5 cm Flexible Plaster Spatula is a dental laboratory and chairside mixing instrument built for alginate, plaster, stone, and cement preparation. The broad, rounded, flexible stainless-steel blade spreads and folds material evenly against the wall of a rubber mixing bowl, eliminating air voids and producing a homogeneous mix ready for impression trays and models. A lightweight molded plastic handle offers a confident, non-slip grip, while a through-hole at the butt end allows hanging storage on a lab board. Supplied in corrosion-resistant stainless steel by Equate Instruments for daily impression, model, and cement workflows in the surgery and the lab.
View
Flexible Laboratory Knife 18 cm - Wooden Handle
A slim 18 cm laboratory knife with a deliberately flexible, tapered stainless-steel blade and a turned hardwood handle fitted with a brass ferrule. The flexible blade conforms against plaster models, wax-up contours and alginate surfaces for delicate trimming, adapting wax and cleaning edges without gouging the underlying material. The balanced, tapered wooden handle sits comfortably in a pen grip for long, controlled bench sessions, and the brass ferrule protects the join between blade and handle from splitting. Manufactured from polished stainless steel by Equate Instruments for dental technicians who prefer a delicate knife alongside heavier plaster tools.
View
Spatula Flexible 21.5 cm with Hardwood Handle
The 21.5 cm Flexible Plaster Spatula is a dental laboratory and chairside mixing instrument built for alginate, plaster, stone, and cement preparation. The broad, rounded, flexible stainless-steel blade spreads and folds material evenly against the wall of a rubber mixing bowl, eliminating air voids and producing a homogeneous mix ready for impression trays and models. A contoured hardwood handle secured with exposed rivets gives a warm, balanced grip for extended mixing sessions. Supplied in corrosion-resistant stainless steel by Equate Instruments for daily impression, model, and cement workflows in the surgery and the lab.
View
Laboratory Plaster Knife 20.5 cm - Colourful Wooden Handle
A 20.5 cm laboratory plaster knife with a long, flat, flexible stainless-steel blade and a shaped colourful hardwood handle secured by two brass rivets. The extended blade length gives generous reach and sweep for mixing and spreading plaster, stone and alginate slurry in larger mixing bowls and for trimming bigger study models on the bench. The contoured wooden grip sits comfortably in the palm during extended sessions, and the coloured finish helps technicians identify personal tools on a shared bench. Manufactured from polished stainless steel by Equate Instruments as a workhorse lab knife for model trimmers, technicians and prosthodontic staff.
View
Plaster Spatula Ridge Blade
The Plaster Spatula is a knife-style mixing tool used across the dental laboratory to blend gypsum, alginate, and other plaster-based materials on a slab. A stainless-steel blade is riveted into a contoured wooden handle with brass pins, giving a balanced grip that suits long mixing sessions and wax-up work. This configuration carries a stiff ridge blade that drives through heavier plaster and dental stone without flexing excessively, and the tapered rounded tip releases material cleanly off both faces. Equate Instruments supplies this plaster spatula for routine lab use; the stainless blade tolerates chemical disinfection while the wooden handle is intended for wipe-down cleaning rather than steam autoclaving.
View
