Rubber Dam Kit - Set of 17
This rubber dam isolation kit from Equate Instruments bundles the core hand tools needed to isolate any adult tooth for restorative, endodontic or adhesive treatment. The foam-lined presentation case holds a stainless-steel rubber dam frame, a universal dam punch for sizing holes to any arch position, a spring-loaded clamp forceps for seating and removing retainers, and a mounted rack of 13 numbered stainless-steel clamps covering anterior, premolar and molar positions. Clamp numbering spans the widely used Ivory pattern, including 24, 25, 26, 28, 56A, 210, 211, 12A, 13A, 201, 202, 206 and 207, giving clinicians a single source for most adult isolation cases. All metal components are fully autoclavable and supplied non-sterile for in-clinic steam sterilisation.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Rubber Dam Punch and Clamp Forceps Kit of 4
This four-piece rubber dam kit gathers the core instruments a dental team needs to place and retain an isolation dam in a single lined presentation tray. Two rotary rubber dam punches feature graduated plate holes for incisor, bicuspid, and molar dam apertures, while two spring-loaded rubber dam forceps engage and seat clamps onto the abutment teeth. The forceps jaws are shaped to cradle both winged and wingless rubber dam clamps, and the punches carry a numbered dial for repeatable hole selection. All four instruments are forged from surgical stainless steel by Equate Instruments, fully autoclavable, and supplied non-sterile for clinic-side steam sterilisation.
View
Rubber Dam Kit 17 Pieces - Leather Case
This 17-piece rubber dam kit gathers every instrument needed to place and stabilise a rubber dam for isolated restorative, endodontic, or bonding procedures. The assortment includes a punch, clamp forceps, a frame, and a range of stainless-steel clamps covering anterior, premolar, and molar sites so the operatory has the right retainer ready for every presentation. Every component is forged from stainless steel and nests inside a zipped leather-look carry case, keeping the kit organised on the bench and easy to transport between chairs. Fully autoclavable and supplied non-sterile, the clamps, forceps, and punch can be reprocessed after each use. Equate Instruments delivers the kit ready for standard steam sterilisation of the metal components.
View
Rubber Dam Kit 12 Pieces - Plastic Box
This 12-piece rubber dam kit is a compact starter assortment of the instruments needed to place and stabilise a rubber dam for isolated restorative, endodontic, or bonding procedures. The selection focuses on the punch, clamp forceps, frame, and a core range of stainless-steel clamps so the operatory has a dependable isolation set without the full 17-piece span. Every metal component is forged from stainless steel and seats inside a hinged plastic carry case with a fitted foam insert. The case keeps each part in its own pocket during cleaning and sterilisation staging, and clips shut for tray storage. Fully autoclavable and supplied non-sterile, the clamps, forceps, and punch can be reprocessed after each use. Equate Instruments delivers the kit ready for standard steam sterilisation of the metal components.
View
Rubber Dam Kit - Set of 17 with Gold-Finish Clamps
This rubber dam isolation kit from Equate Instruments bundles the core hand tools needed to isolate any adult tooth for restorative, endodontic or adhesive treatment. The foam-lined presentation case holds a stainless-steel rubber dam frame, a universal dam punch for sizing holes to any arch position, a spring-loaded clamp forceps for seating and removing retainers, and a mounted rack of 13 numbered rubber dam clamps covering anterior, premolar and molar positions. Clamp numbering spans the widely used Ivory pattern, including 24, 25, 26, 28, 56A, 210, 211, 12A, 13A, 201, 202, 206 and 207, giving clinicians a single source for most adult isolation cases. All metal components are fully autoclavable and supplied non-sterile for in-clinic steam sterilisation.
View
Perforated Upper Impression Tray No. 5
The double-ended Explorer is a diagnostic hand instrument used by general dentists and hygienists to detect caries, locate surface calculus, and trace restoration margins during routine examinations. Fine stainless-steel tips transmit clear tactile feedback through the shank, letting the operator trace fissures, margins, and furcation entrances without applying excess force. Offset working ends give angled access to anterior and posterior surfaces from one pen grasp. The ergonomic handle is profiled to stay stable during light, repeated probing and dampens hand fatigue across a full exam schedule. Equate Instruments supplies the explorer non-sterile and fully autoclavable for straightforward processing in pouches or cassettes.
View
Universal Crown Remover
The Universal Crown Remover is a heavy, single-ended instrument for breaking the cement seal on cast and provisional crowns. The broad pear-shaped handle gives the clinician the hand volume and mechanical advantage of an elevator, while the slim angled shank terminates in a small hooked working tip that engages the margin of the crown. Rocking pressure applied through the handle transfers cleanly to the tip and lifts the crown away from the abutment. Equate Instruments forges the body in solid stainless steel for rigidity and long service life. The instrument is corrosion resistant, fully autoclavable, and supplied non-sterile for processing through the clinic's routine sterilisation cycle. Equally useful for prosthodontic recementation appointments and chairside retreatment.
View
Crown Spreader Pliers 17 cm
The Crown Spreader Pliers are a 17 cm reverse-action plier used to break the cement seal on cast crowns by applying a controlled outward force at the crown margin. A pair of small hooked beaks engage the lingual and buccal margins, and when the handles are squeezed the beaks move apart rather than together, spreading the crown off the abutment. The long serrated handles give the clinician firm grip even when wet. Equate Instruments finishes the plier in forged stainless steel with a smooth box-joint pivot. The body is corrosion resistant, fully autoclavable, and supplied non-sterile so the clinic can process it through its routine sterilisation workflow.
View
Crown Removing Pliers
These Crown Removing Pliers lift cemented cast crowns and provisional crowns from the abutment once the cement seal is broken. The angled beak carries a small serrated pad on the inner face that bites into the occlusal or incisal surface of the crown, while the opposing straight jaw rests against the margin. Squeezing the handles pulls the crown axially off the abutment with controlled, repeatable force. Equate Instruments builds the plier in forged stainless steel with tapered arms and a smooth box-joint pivot. The tool is corrosion resistant, fully autoclavable, and supplied non-sterile for processing through the clinic's routine sterilisation workflow.
View
Crown Gripper 16 cm (TC, Gold Rings)
The Crown Gripper is a 16 cm scissor-handled instrument for grasping cemented cast and provisional crowns during removal and recementation. The curved working tip carries a tungsten carbide insert with fine cross-serrations that bite into the occlusal surface of the crown without slipping, even when the field is wet with saliva or cement residue. Finger rings finished in gold-coloured electroplate identify it as a TC instrument at a glance in the tray. Equate Instruments forges the shanks in stainless steel with a smooth box-joint pivot for repeatable closure. The instrument is corrosion resistant, fully autoclavable, and supplied non-sterile for processing through the clinic's routine sterilisation workflow.
View
Incisor Crown Remover Pliers with Rubber Tips 14 cm
The Incisor Crown Remover Pliers are a 14 cm specialist plier for gripping anterior crowns during removal without chipping ceramic or marring the labial face. Both jaws carry interchangeable silicone rubber tips on tension screws so the clinician can adjust the grip distance to suit the incisor being treated. The retentive rubber faces protect the crown while still transferring enough force to pull it axially off the abutment. From Equate Instruments, the stainless steel body is forged with a smooth box-joint pivot, balanced arms, and a coiled return wire that keeps the plier open between squeezes. The instrument is corrosion resistant, fully autoclavable, and supplied non-sterile for processing through the clinic's routine sterilisation workflow.
View
Silicone Rubber Retentive Pads for Crown Remover Pliers - Pack of 20
These silicone rubber retentive pads are the consumable replacement tips for crown-remover pliers. Each pad clips into the angled beak of the pliers and transfers the squeeze force onto the crown through a soft silicone surface, which grips porcelain and metal without marking the restoration during removal. Supplied as an assorted set by Equate Instruments, the pads are intended to be swapped out once their retentive surface wears or tears. Rotate them into your crown-removal workflow to keep a fresh grip on every try-in and change-over.
View
Furrer Copper Ring Removing Forceps, Straight 16 cm
The Furrer Copper Ring Removing Forceps are a straight, 16 cm instrument for lifting copper or stainless impression rings off a prepared abutment after an impression has been taken. The fine straight beaks engage the occlusal edge of the ring, and a thumbscrew on the shank adjusts the opening width so the clinician can dial in the exact grip distance for the ring being removed before squeezing the forceps closed. Equate Instruments forges the body in stainless steel with tapered arms, a smooth box-joint pivot, and a corrosion-resistant finish. The instrument is fully autoclavable and is supplied non-sterile so the clinic can process it through its routine sterilisation workflow.
View
