Rubber Dam Frame for Adults, 9 x 9 cm
The Rubber Dam Frame for Adults 9 x 9 cm is a compact square U-shaped stainless-steel frame that holds a rubber dam taut across the patient's mouth during isolated restorative and endodontic procedures. Six lateral pins grip the dam evenly, stretching the sheet without over-tensioning so the operator has a stable, dry working field that does not distort during extended procedures. Equate Instruments manufactures the frame in polished surgical stainless steel with a rounded profile that sits comfortably against the patient's face. The slightly more compact 9 x 9 cm footprint suits smaller adult jaws and long-face anatomies where a wider frame can feel intrusive. Fully autoclavable, the frame pairs with standard punches, clamps, and clamp forceps in any rubber-dam isolation kit.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Rubber Dam Frame - Young Pattern (Small)
The Small Young-Pattern Rubber Dam Frame from Equate Instruments is a U-shaped stainless-steel frame used to tension and support the rubber dam sheet during tooth isolation. Peripheral pegs along the frame engage the dam at regular intervals, holding the sheet taut around the operative field while leaving clear line-of-sight and working access to the isolated teeth. The narrow profile of the small frame is well suited to paediatric patients, anterior isolation, and cases where a full-arch frame gets in the way of instruments and the operator's hands. Fully autoclavable, the frame is reusable across many procedures and drops neatly into the standard rubber dam cassette alongside the punch and clamp forceps.
View
Adult Rubber Dam Frame 10x11cm (Nygaard-Ostby Pattern)
The Adult Rubber Dam Frame 10x11 cm from Equate Instruments is a full-arch stainless-steel frame used to tension and support the rubber dam sheet during routine isolation procedures. The curved Nygaard-Ostby profile conforms to the contour of the face, sitting comfortably around the mouth while peripheral pegs engage the sheet at regular intervals to hold it taut. At 10x11 cm the frame gives the clinician clear visibility and instrument access to all quadrants of the adult dentition. It is manufactured from stainless steel and is fully autoclavable, slotting into the standard rubber dam cassette alongside the punch and clamp forceps for in-clinic sterilisation and reuse.
View
Rubber Dam Frame for Adults, 9 x 10 cm
The Rubber Dam Frame for Adults 9 x 10 cm is a U-shaped stainless-steel frame that holds a rubber dam taut across the patient's mouth during isolated restorative and endodontic procedures. Six small lateral pins grip the rubber dam evenly along each side of the frame, stretching the sheet without over-tensioning so the operator has a stable, dry working field. Equate Instruments manufactures the frame in polished surgical stainless steel with a rounded profile that sits comfortably against the patient's face. The open frame design keeps the nostrils clear and gives the chairside assistant easy access for rinsing and suction. Fully autoclavable, the frame is a core component of any adult rubber-dam isolation kit and pairs with standard punches, clamps, and forceps.
View
Rubber Dam Frame for Adults, 10 x 7.5 cm
The Rubber Dam Frame for Adults 10 x 7.5 cm is a wider, lower-profile stainless-steel U-frame that holds a rubber dam taut for restorative and endodontic procedures. The broader 10 cm span gives a slightly larger working window on the tooth while the 7.5 cm height keeps the upper lip unobstructed, which is useful on patients with a short vertical lip drape. Six lateral pins grip the dam evenly and the rounded profile rests comfortably on the face. Equate Instruments builds the frame from polished surgical stainless steel that is fully autoclavable, so it can be reprocessed alongside the clamps, punch, and clamp forceps that complete an isolation kit. The wider, lower geometry makes it a good choice for posterior single-tooth endodontic work.
View
Perforated Upper Impression Tray No. 5
The double-ended Explorer is a diagnostic hand instrument used by general dentists and hygienists to detect caries, locate surface calculus, and trace restoration margins during routine examinations. Fine stainless-steel tips transmit clear tactile feedback through the shank, letting the operator trace fissures, margins, and furcation entrances without applying excess force. Offset working ends give angled access to anterior and posterior surfaces from one pen grasp. The ergonomic handle is profiled to stay stable during light, repeated probing and dampens hand fatigue across a full exam schedule. Equate Instruments supplies the explorer non-sterile and fully autoclavable for straightforward processing in pouches or cassettes.
View
Universal Crown Remover
The Universal Crown Remover is a heavy, single-ended instrument for breaking the cement seal on cast and provisional crowns. The broad pear-shaped handle gives the clinician the hand volume and mechanical advantage of an elevator, while the slim angled shank terminates in a small hooked working tip that engages the margin of the crown. Rocking pressure applied through the handle transfers cleanly to the tip and lifts the crown away from the abutment. Equate Instruments forges the body in solid stainless steel for rigidity and long service life. The instrument is corrosion resistant, fully autoclavable, and supplied non-sterile for processing through the clinic's routine sterilisation cycle. Equally useful for prosthodontic recementation appointments and chairside retreatment.
View
Crown Spreader Pliers 17 cm
The Crown Spreader Pliers are a 17 cm reverse-action plier used to break the cement seal on cast crowns by applying a controlled outward force at the crown margin. A pair of small hooked beaks engage the lingual and buccal margins, and when the handles are squeezed the beaks move apart rather than together, spreading the crown off the abutment. The long serrated handles give the clinician firm grip even when wet. Equate Instruments finishes the plier in forged stainless steel with a smooth box-joint pivot. The body is corrosion resistant, fully autoclavable, and supplied non-sterile so the clinic can process it through its routine sterilisation workflow.
View
Crown Removing Pliers
These Crown Removing Pliers lift cemented cast crowns and provisional crowns from the abutment once the cement seal is broken. The angled beak carries a small serrated pad on the inner face that bites into the occlusal or incisal surface of the crown, while the opposing straight jaw rests against the margin. Squeezing the handles pulls the crown axially off the abutment with controlled, repeatable force. Equate Instruments builds the plier in forged stainless steel with tapered arms and a smooth box-joint pivot. The tool is corrosion resistant, fully autoclavable, and supplied non-sterile for processing through the clinic's routine sterilisation workflow.
View
Crown Gripper 16 cm (TC, Gold Rings)
The Crown Gripper is a 16 cm scissor-handled instrument for grasping cemented cast and provisional crowns during removal and recementation. The curved working tip carries a tungsten carbide insert with fine cross-serrations that bite into the occlusal surface of the crown without slipping, even when the field is wet with saliva or cement residue. Finger rings finished in gold-coloured electroplate identify it as a TC instrument at a glance in the tray. Equate Instruments forges the shanks in stainless steel with a smooth box-joint pivot for repeatable closure. The instrument is corrosion resistant, fully autoclavable, and supplied non-sterile for processing through the clinic's routine sterilisation workflow.
View
Incisor Crown Remover Pliers with Rubber Tips 14 cm
The Incisor Crown Remover Pliers are a 14 cm specialist plier for gripping anterior crowns during removal without chipping ceramic or marring the labial face. Both jaws carry interchangeable silicone rubber tips on tension screws so the clinician can adjust the grip distance to suit the incisor being treated. The retentive rubber faces protect the crown while still transferring enough force to pull it axially off the abutment. From Equate Instruments, the stainless steel body is forged with a smooth box-joint pivot, balanced arms, and a coiled return wire that keeps the plier open between squeezes. The instrument is corrosion resistant, fully autoclavable, and supplied non-sterile for processing through the clinic's routine sterilisation workflow.
View
Silicone Rubber Retentive Pads for Crown Remover Pliers - Pack of 20
These silicone rubber retentive pads are the consumable replacement tips for crown-remover pliers. Each pad clips into the angled beak of the pliers and transfers the squeeze force onto the crown through a soft silicone surface, which grips porcelain and metal without marking the restoration during removal. Supplied as an assorted set by Equate Instruments, the pads are intended to be swapped out once their retentive surface wears or tears. Rotate them into your crown-removal workflow to keep a fresh grip on every try-in and change-over.
View
Furrer Copper Ring Removing Forceps, Straight 16 cm
The Furrer Copper Ring Removing Forceps are a straight, 16 cm instrument for lifting copper or stainless impression rings off a prepared abutment after an impression has been taken. The fine straight beaks engage the occlusal edge of the ring, and a thumbscrew on the shank adjusts the opening width so the clinician can dial in the exact grip distance for the ring being removed before squeezing the forceps closed. Equate Instruments forges the body in stainless steel with tapered arms, a smooth box-joint pivot, and a corrosion-resistant finish. The instrument is fully autoclavable and is supplied non-sterile so the clinic can process it through its routine sterilisation workflow.
View
