Rubber Dam Clamp - Universal Molars
The Rubber Dam Clamp - Universal Molars is a stainless-steel fixed retainer used to anchor a rubber dam around molar teeth during restorative, endodontic, and isolation procedures. Its symmetrical jaws engage standard and partially erupted molar crowns for a stable four-point seat at the cervical line. Manufactured by Equate Instruments from spring-tempered stainless steel, this clamp is fully autoclavable and supplied non-sterile so the clinic can reprocess it through its standard cassette workflow. Two forceps holes seat standard rubber dam clamp forceps for controlled placement and retrieval through the short archwire bow.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Rubber Dam Clamp #10 (Universal)
The Rubber Dam Clamp #10 from Equate Instruments is a universal-pattern winged clamp used to anchor the rubber dam sheet around a tooth during isolation. The double-holed beaks engage a standard Brewer or straight clamp forceps, while the curved jaws grip the cervical contour of the tooth with four symmetrical points of contact for stable seating. Marked with its figure number for quick identification, the clamp is suited to partial-erupted molars and similar retention contours within the Ivory universal range. It is machined from hardened stainless steel and supplied non-sterile for autoclave processing in pouches or cassettes alongside the rest of the rubber dam kit.
View
Rubber Dam Clamp #11 (Universal)
The Rubber Dam Clamp #11 from Equate Instruments is a universal-pattern winged clamp used to anchor the rubber dam sheet around a tooth during isolation. The double-holed beaks engage a standard Brewer or straight clamp forceps, and the curved jaws grip the cervical contour with four symmetrical points of contact so the clamp stays stable under the tension of the dam. Figure number 11 is stamped on the bow for quick identification, and the clamp is well suited to molars and similar retention contours within the Ivory universal range. Machined from hardened stainless steel and fully autoclavable, it is supplied non-sterile for in-clinic processing alongside the rest of the rubber dam clamp selection.
View
Rubber Dam Clamp #18 (Universal)
The Rubber Dam Clamp #18 from Equate Instruments is a universal-pattern winged clamp used to anchor the rubber dam sheet around a tooth during isolation. The beaks angle downward from the bow so the clamp settles cleanly around lower molars and similar retention contours in the Ivory universal numbering range, giving stable four-point grip at the cervical margin. Double forceps-engagement holes accept standard Brewer or straight clamp forceps, and the figure number is stamped on the bow for quick identification on the tray. The clamp is machined from hardened stainless steel and is fully autoclavable, supplied non-sterile for standard in-clinic processing.
View
Rubber Dam Clamp #24 (Universal)
The Rubber Dam Clamp #24 from Equate Instruments is a universal-pattern winged clamp used to anchor the rubber dam sheet around a tooth during isolation. The slim curved beaks grip narrower tooth contours in the Ivory universal numbering range, giving stable four-point retention without crowding adjacent teeth or soft tissue. Double forceps-engagement holes accept a standard Brewer or straight clamp forceps, and the figure number is stamped on the bow for quick identification on the tray. The clamp is machined from hardened stainless steel and is fully autoclavable, supplied non-sterile for standard in-clinic processing alongside the rest of the rubber dam clamp selection.
View
Rubber Dam Clamp #25 (Universal)
The Rubber Dam Clamp #25 from Equate Instruments is a universal-pattern winged clamp used to anchor the rubber dam sheet around a tooth during isolation. The slim curved beaks grip narrower tooth contours within the Ivory universal range, giving stable four-point retention at the cervical margin without crowding adjacent teeth or soft tissue. Double forceps-engagement holes accept a standard Brewer or straight clamp forceps, and the figure number is stamped on the bow for quick identification on the tray. The clamp is machined from hardened stainless steel and is fully autoclavable, supplied non-sterile for standard in-clinic processing alongside the rest of the rubber dam clamp selection.
View
Rubber Dam Clamp #56 (Universal)
The Rubber Dam Clamp #56 from Equate Instruments is a universal-pattern winged clamp used to anchor the rubber dam sheet around a tooth during isolation. The wider winged beaks grip larger tooth contours within the Ivory universal numbering range, giving stable four-point retention on molars and large partially erupted teeth. Double forceps-engagement holes accept a standard Brewer or straight clamp forceps, and the figure number is stamped on the bow for quick identification on the tray. The clamp is machined from hardened stainless steel and is fully autoclavable, supplied non-sterile for standard in-clinic processing alongside the rest of the rubber dam clamp selection.
View
Rubber Dam Clamp Fig. 8A - Universal Molar
The Rubber Dam Clamp Fig. 8A from Equate Instruments is a stainless-steel fixed retainer with deeply festooned jaws engineered to grip root surfaces and cervical undercuts on upper and lower molars (teeth 1-3, 14-19, 30-32). The pronounced jaw scallops seat into the interproximal embrasures, delivering a stable four-point contact ideal for partially erupted, broken-down, or root-only molar teeth. Fabricated from spring-tempered stainless steel, the clamp is fully autoclavable and supplied non-sterile for in-clinic sterilisation. Two forceps holes accept standard rubber dam clamp forceps for controlled placement and retrieval through a short archwire bow.
View
Rubber Dam Clamp Fig. 8AD - Universal Molar
The Rubber Dam Clamp Fig. 8AD from Equate Instruments is a stainless-steel fixed retainer closely related to the classic 8A, with festooned jaws that engage the cervical region of upper and lower molars. The 8AD variant offers a taller bow and refined jaw profile, making it well suited to deeply broken-down molars and cases where the dam needs to sit apically to the gingival margin. Made from spring-tempered stainless steel, the clamp is fully autoclavable and supplied non-sterile for in-clinic sterilisation. Twin forceps holes seat standard rubber dam clamp forceps for controlled placement and retrieval, while the universal profile fits both arches.
View
Rubber Dam Clamp Fig. W14 - Wingless Universal Molar
The Rubber Dam Clamp Fig. W14 from Equate Instruments is a wingless stainless-steel retainer used to anchor a rubber dam around molar teeth during restorative and endodontic isolation. The wingless jaw profile keeps the clamp profile low around the tooth so the dam can be pre-threaded onto the clamp, then stretched over the crown as a single assembly. Manufactured from spring-tempered stainless steel, the clamp is fully autoclavable and supplied non-sterile for in-clinic sterilisation. Two symmetrical forceps holes accept standard rubber dam clamp forceps, and the rounded bow gives a clean, low-profile seat that minimises operator interference.
View
Rubber Dam Clamp Fig. W14A - Wingless Deeply Festooned Molar
The Rubber Dam Clamp Fig. W14A from Equate Instruments is a wingless stainless-steel retainer with deeply festooned jaws that engage root surfaces and cervical undercuts on partially erupted or irregularly shaped molars (teeth 1-3, 14-19, 30-32). The wingless profile lets the clinician pre-thread the rubber dam, while the aggressive jaw scallops secure the clamp on broken-down or sub-gingival molars. Made from spring-tempered stainless steel, the clamp is fully autoclavable and supplied non-sterile for in-clinic processing. Twin forceps holes accept standard rubber dam clamp forceps for precise placement and retrieval through the low-profile bow.
View
Rubber Dam Clamp Fig. W8A - Wingless Festooned Molar
The Rubber Dam Clamp Fig. W8A from Equate Instruments is the wingless counterpart of the classic 8A, with festooned jaws profiled to grip root surfaces and cervical undercuts on upper and lower molars (teeth 1-3, 14-19, 30-32). The wingless design keeps the clamp low around the crown so the rubber dam can be pre-threaded and delivered in a single step. Made from spring-tempered stainless steel, the clamp is fully autoclavable and supplied non-sterile for in-clinic sterilisation. Two forceps holes accept standard rubber dam clamp forceps for controlled placement and retrieval.
View
Perforated Upper Impression Tray No. 5
The double-ended Explorer is a diagnostic hand instrument used by general dentists and hygienists to detect caries, locate surface calculus, and trace restoration margins during routine examinations. Fine stainless-steel tips transmit clear tactile feedback through the shank, letting the operator trace fissures, margins, and furcation entrances without applying excess force. Offset working ends give angled access to anterior and posterior surfaces from one pen grasp. The ergonomic handle is profiled to stay stable during light, repeated probing and dampens hand fatigue across a full exam schedule. Equate Instruments supplies the explorer non-sterile and fully autoclavable for straightforward processing in pouches or cassettes.
View
