Rubber Dam Clamp Set, 13 Pieces, in Tray
This 13-piece Rubber Dam Clamp Set covers the common adult, pediatric, and anterior clamp sizes a general dental practice needs for everyday rubber-dam isolation. The assortment is arranged on a slotted stainless-steel tray so the clamps remain visible, organised, and easy to select during procedures, and the same tray can travel from the sterilisation area to the chair without re-handling. Equate Instruments manufactures each clamp from hardened surgical stainless steel with polished, rounded jaw tips that grip the cervical area of the tooth without bruising gingiva. The accompanying tray is fully autoclavable alongside the clamps, so the entire set can be processed as a single unit and returned to service immediately after the cycle is complete.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Rubber Dam Clamp Kit, 13 Pieces
A 13-piece rubber dam clamp kit presented on a red coding plate, covering the most commonly used clamp positions for operative and endodontic isolation. Winged and wingless clamps are laid out across three rows for anterior, premolar, and molar positions, with numeric identifiers (24, 25, 26, 28, 13A, 56A, 201, 202, 207, 210, 211) silk-screened beside each slot. Each clamp is manufactured by Equate Instruments from autoclavable spring-tempered stainless steel, finished with a non-reflective dark coating to reduce chairside glare during isolation. The whole kit is supplied non-sterile on its coded tray for routine in-office sterilisation.
View
Rubber Dam Clamp Kit, 13 Pieces, Gold-coloured Clamps
A 13-piece rubber dam clamp kit presented on a red coding plate, covering the most commonly used clamp positions for operative and endodontic isolation. Winged and wingless clamps are laid out across three rows for anterior, premolar, and molar positions, with numeric identifiers (24, 25, 26, 28, 13A, 56A, 201, 202, 207, 210, 211) silk-screened beside each slot. Each clamp is manufactured by Equate Instruments from autoclavable spring-tempered stainless steel, finished in a warm gold-coloured coating for fast visual identification at the chairside. The whole kit is supplied non-sterile on its coded tray for routine in-office sterilisation.
View
Perforated Upper Impression Tray No. 5
The double-ended Explorer is a diagnostic hand instrument used by general dentists and hygienists to detect caries, locate surface calculus, and trace restoration margins during routine examinations. Fine stainless-steel tips transmit clear tactile feedback through the shank, letting the operator trace fissures, margins, and furcation entrances without applying excess force. Offset working ends give angled access to anterior and posterior surfaces from one pen grasp. The ergonomic handle is profiled to stay stable during light, repeated probing and dampens hand fatigue across a full exam schedule. Equate Instruments supplies the explorer non-sterile and fully autoclavable for straightforward processing in pouches or cassettes.
View
Universal Crown Remover
The Universal Crown Remover is a heavy, single-ended instrument for breaking the cement seal on cast and provisional crowns. The broad pear-shaped handle gives the clinician the hand volume and mechanical advantage of an elevator, while the slim angled shank terminates in a small hooked working tip that engages the margin of the crown. Rocking pressure applied through the handle transfers cleanly to the tip and lifts the crown away from the abutment. Equate Instruments forges the body in solid stainless steel for rigidity and long service life. The instrument is corrosion resistant, fully autoclavable, and supplied non-sterile for processing through the clinic's routine sterilisation cycle. Equally useful for prosthodontic recementation appointments and chairside retreatment.
View
Crown Spreader Pliers 17 cm
The Crown Spreader Pliers are a 17 cm reverse-action plier used to break the cement seal on cast crowns by applying a controlled outward force at the crown margin. A pair of small hooked beaks engage the lingual and buccal margins, and when the handles are squeezed the beaks move apart rather than together, spreading the crown off the abutment. The long serrated handles give the clinician firm grip even when wet. Equate Instruments finishes the plier in forged stainless steel with a smooth box-joint pivot. The body is corrosion resistant, fully autoclavable, and supplied non-sterile so the clinic can process it through its routine sterilisation workflow.
View
Crown Removing Pliers
These Crown Removing Pliers lift cemented cast crowns and provisional crowns from the abutment once the cement seal is broken. The angled beak carries a small serrated pad on the inner face that bites into the occlusal or incisal surface of the crown, while the opposing straight jaw rests against the margin. Squeezing the handles pulls the crown axially off the abutment with controlled, repeatable force. Equate Instruments builds the plier in forged stainless steel with tapered arms and a smooth box-joint pivot. The tool is corrosion resistant, fully autoclavable, and supplied non-sterile for processing through the clinic's routine sterilisation workflow.
View
Crown Gripper 16 cm (TC, Gold Rings)
The Crown Gripper is a 16 cm scissor-handled instrument for grasping cemented cast and provisional crowns during removal and recementation. The curved working tip carries a tungsten carbide insert with fine cross-serrations that bite into the occlusal surface of the crown without slipping, even when the field is wet with saliva or cement residue. Finger rings finished in gold-coloured electroplate identify it as a TC instrument at a glance in the tray. Equate Instruments forges the shanks in stainless steel with a smooth box-joint pivot for repeatable closure. The instrument is corrosion resistant, fully autoclavable, and supplied non-sterile for processing through the clinic's routine sterilisation workflow.
View
Incisor Crown Remover Pliers with Rubber Tips 14 cm
The Incisor Crown Remover Pliers are a 14 cm specialist plier for gripping anterior crowns during removal without chipping ceramic or marring the labial face. Both jaws carry interchangeable silicone rubber tips on tension screws so the clinician can adjust the grip distance to suit the incisor being treated. The retentive rubber faces protect the crown while still transferring enough force to pull it axially off the abutment. From Equate Instruments, the stainless steel body is forged with a smooth box-joint pivot, balanced arms, and a coiled return wire that keeps the plier open between squeezes. The instrument is corrosion resistant, fully autoclavable, and supplied non-sterile for processing through the clinic's routine sterilisation workflow.
View
Silicone Rubber Retentive Pads for Crown Remover Pliers - Pack of 20
These silicone rubber retentive pads are the consumable replacement tips for crown-remover pliers. Each pad clips into the angled beak of the pliers and transfers the squeeze force onto the crown through a soft silicone surface, which grips porcelain and metal without marking the restoration during removal. Supplied as an assorted set by Equate Instruments, the pads are intended to be swapped out once their retentive surface wears or tears. Rotate them into your crown-removal workflow to keep a fresh grip on every try-in and change-over.
View
Furrer Copper Ring Removing Forceps, Straight 16 cm
The Furrer Copper Ring Removing Forceps are a straight, 16 cm instrument for lifting copper or stainless impression rings off a prepared abutment after an impression has been taken. The fine straight beaks engage the occlusal edge of the ring, and a thumbscrew on the shank adjusts the opening width so the clinician can dial in the exact grip distance for the ring being removed before squeezing the forceps closed. Equate Instruments forges the body in stainless steel with tapered arms, a smooth box-joint pivot, and a corrosion-resistant finish. The instrument is fully autoclavable and is supplied non-sterile so the clinic can process it through its routine sterilisation workflow.
View
Telescope Crown Forceps
The Telescope Crown Forceps are a prosthodontic instrument for breaking the cement seal between a telescope secondary crown and its primary coping. The fine paired beaks engage both sides of the telescope crown, and a thumbscrew on the shank presets the closing distance so each squeeze applies controlled, repeatable force along the long axis of the crown. Long serrated handles give reliable grip through the removal stroke, even when the field is wet. Equate Instruments forges the body in stainless steel with a smooth box-joint pivot. The instrument is corrosion resistant, fully autoclavable, and supplied non-sterile for processing through the clinic's routine sterilisation workflow.
View
Automatic Crown Remover Set with 3 Tips and Mounting Tool
The Automatic Crown Remover Set from Equate Instruments is a spring-loaded pistol-grip instrument supplied with three interchangeable working tips and a mounting tool. Squeezing the trigger releases stored spring energy through the threaded tip, delivering a controlled impulse that fractures the cement lute beneath bonded crowns and bridges. The knurled mid-section and deeply ribbed lower handle support secure single-hand operation. Each tip has a different working-end geometry for hooking on to cast, ceramic, or metal-ceramic restorations from buccal, lingual, and proximal angles. The mounting tool tightens the tip into the instrument head, and the stainless steel construction is fully autoclavable for routine in-clinic sterilisation.
View
