Williams Periodontal Probe - Hollow Handle 10mm
The Williams Periodontal Probe is a single-ended measuring instrument calibrated at 1, 2, 3, 5, 7, 8, 9 and 10 mm, with the 4 and 6 mm lines intentionally omitted for clearer visual reading. Clinicians use it to chart periodontal pocket depth, attachment loss, gingival recession and bleeding indices during periodontal assessment. Crafted from stainless steel with a 10 mm hollow handle and grooved ergonomic grip, the probe offers tactile feedback without excess weight during extended exams. Equate Instruments supplies it non-sterile and fully autoclavable for routine clinic sterilisation.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Williams Periodontal Probe - Knurled Solid Handle
The Williams Periodontal Probe is a single-ended hand probe for measuring pocket depth and charting attachment loss across every surface of the dentition. Its round slender working tip carries the classic Williams millimetre pattern at 1, 2, 3, 5, 7, 8, 9 and 10 mm, with the 4 and 6 mm marks intentionally omitted so depth reads cleanly against the gingival margin. The round knurled solid handle gives a light, tactile grip during full-mouth periodontal charting, and the overall balance keeps the tip controlled as the clinician walks around the sulcus. Manufactured from stainless steel by Equate Instruments and fully autoclavable, it is a reliable daily-driver for hygienists and general dentists running initial and recall periodontal assessments. Supplied non-sterile for in-clinic steam sterilisation.
View
Williams Periodontal Probe - 6 mm Solid Handle
The Williams Periodontal Probe is a single-ended diagnostic instrument used to measure sulcus depth, chart attachment loss, and assess gingival recession. Its working end carries the classic Williams markings at 1, 2, 3, 5, 7, 9, and 10 mm, giving the clinician a consistent visual reference when recording periodontal readings. Built by Equate Instruments from hardened stainless steel with a slim fine-ribbed 6 mm solid handle, the probe is balanced for repeated full-mouth charting. It is fully autoclavable and supplied non-sterile for in-clinic steam sterilisation in pouches or cassettes.
View
Williams Periodontal Probe - Octagonal Knurled Solid Handle
The Williams Periodontal Probe is a single-ended hand probe for measuring pocket depth and charting attachment loss across every surface of the dentition. Its round slender working tip carries the classic Williams millimetre pattern at 1, 2, 3, 5, 7, 8, 9 and 10 mm, with the 4 and 6 mm marks intentionally omitted so depth reads cleanly against the gingival margin. This version carries an octagonal solid handle with a knurled upper grip band, giving flat reference faces that resist roll across the tray and a firm, positive index grip during charting. Manufactured from stainless steel by Equate Instruments and fully autoclavable, it is a reliable daily-driver for hygienists and general dentists running initial and recall periodontal assessments. Supplied non-sterile for in-clinic steam sterilisation.
View
Williams Periodontal Probe - Orange Silicone Handle
The Williams periodontal probe is a calibrated hand instrument for six-point pocket charting and attachment-level assessment. Its working end is engraved with the classic Williams markings at 1, 2, 3, 5, 7, 8, 9 and 10 millimetres, the industry reference for consistent periodontal measurement. The slim light-orange silicone-sleeved handle provides a warm, non-slip tactile grip that helps control probe pressure during long recall lists. The stainless steel working end is fully autoclavable and the probe is supplied non-sterile by Equate Instruments for routine in-clinic processing in pouches or cassettes.
View
Williams / Goldman-Fox Probe - Solid Handle 6mm
This double-ended periodontal probe carries a round Williams working end on one side and a flat Goldman-Fox end on the other. Both ends use the classic 1-2-3-5-7-8-9-10 mm Williams graduations, giving the clinician a choice between the slim round tip for narrow sulci and the flat Goldman-Fox tip for wider, more retractable pockets. The 6 mm solid stainless-steel handle is knurled end-to-end for a stable rotatable grip during systematic charting. One-piece stainless construction from Equate Instruments is fully autoclavable and integrates with cassette-based reprocessing.
View
Michigan Fig.17 Periodontal Probe - Solid Handle 6mm
The Michigan Fig.17 Periodontal Probe is a double-ended diagnostic instrument for measuring pocket depth, clinical attachment loss, and gingival recession during periodontal charting. Each working end carries a slim tapered tip with Michigan-style millimetre markings, so the clinician can record six-point probing depths on every tooth without changing instruments. The 6 mm knurled stainless-steel handle is lightweight and balanced for the steady, gentle pressure periodontal probing requires. Equate Instruments supplies this probe non-sterile and fully autoclavable, ready for routine in-clinic steam sterilisation between patients.
View
Williams Fig.17 Periodontal Probe - Solid Handle 6mm
The Williams Fig.17 Periodontal Probe is a double-ended diagnostic instrument with the classic Williams millimetre pattern at 1, 2, 3, 5, 7, 8, 9, and 10 mm. The clinician can measure pocket depth, record attachment loss, and chart recession at six sites per tooth using a probe pattern that has been the reference in periodontal screening for decades. The 6 mm knurled stainless-steel handle is lightweight and balanced for steady probing pressure, and the tapered tips thread easily into the sulcus. Equate Instruments supplies this probe non-sterile and fully autoclavable, ready for routine in-clinic steam sterilisation.
View
Goldman-Fox Periodontal Probe Fig.3 - Solid Handle 6mm
The Goldman-Fox Fig.3 Periodontal Probe is a double-ended hand instrument for measuring pocket depth and charting attachment loss around every surface of the dentition. The Fig.3 working end carries the classic Goldman-Fox millimetre markings at 1, 2, 3, 5, 7, 8, 9 and 10 mm for unambiguous pocket reading under the light. The opposite end pairs the probe with a slender curved explorer-style tip so the clinician can confirm cemento-enamel junctions and detect marginal irregularities without switching instruments. Crafted from stainless steel with a 6 mm finely ribbed solid handle, the probe offers a light, tactile grip that reduces hand fatigue across full-mouth periodontal charting. Manufactured by Equate Instruments and fully autoclavable, it is supplied non-sterile for in-clinic steam sterilisation.
View
Michigan Fig. 3 Periodontal Probe 6mm
The Michigan Fig. 3 periodontal probe is a double-ended diagnostic instrument built around the classic Michigan O probe profile with a Fig. 3 shank for posterior access. The tapered working ends allow consistent periodontal pocket measurement and tactile assessment of the gingival sulcus during routine charting and recall exams. Crafted from stainless steel and mounted on a 6 mm solid knurled handle, this probe from Equate Instruments is fully autoclavable and corrosion-resistant. The lightweight balance and textured grip maintain tactile feedback during wet procedures and support extended diagnostic appointments. Supplied non-sterile for in-clinic steam sterilisation.
View
Williams Fig. 3 Periodontal Probe 6mm
The Williams Fig. 3 periodontal probe is a double-ended diagnostic instrument calibrated with the classic Williams 1-2-3-5-7-8-9-10 mm marking scheme. The Fig. 3 tapered shank provides access around posterior teeth while the opposite end carries a slim marked probe tip for detailed anterior charting and attachment-level recording. Machined from stainless steel and mounted on a 6 mm solid knurled handle, this probe from Equate Instruments is fully autoclavable and corrosion-resistant. The textured grip maintains tactile feedback during wet procedures and the balanced profile suits extended periodontal charting appointments. Supplied non-sterile for in-clinic steam sterilisation.
View
Goldman-Fox Periodontal Probe Fig.16 - Solid Handle 6mm
The Goldman-Fox Fig.16 Periodontal Probe is a double-ended hand instrument for measuring pocket depth and charting attachment loss around every surface of the dentition. The Fig.16 working end carries the classic Goldman-Fox millimetre markings at 1, 2, 3, 5, 7, 8, 9 and 10 mm for unambiguous pocket reading under the light. The opposite end pairs the probe with a slender straight explorer-style tip so the clinician can confirm marginal irregularities along interproximal and subgingival surfaces without switching instruments. Crafted from stainless steel with a 6 mm finely ribbed solid handle, the probe offers a light, tactile grip that reduces hand fatigue across full-mouth periodontal charting. Manufactured by Equate Instruments and fully autoclavable, it is supplied non-sterile for in-clinic steam sterilisation.
View
Michigan Fig. 16 Periodontal Probe 6mm
The Michigan Fig. 16 periodontal probe is a double-ended diagnostic instrument built around the classic Michigan O probe profile with a Fig. 16 shank designed for broader posterior access. The tapered working ends support consistent periodontal pocket measurement and tactile sulcus assessment during routine examinations and recall appointments. Machined from stainless steel and mounted on a 6 mm solid knurled handle, this probe from Equate Instruments is fully autoclavable and corrosion-resistant. The lightweight balance and textured grip preserve tactile feedback during wet procedures and support longer charting appointments. Supplied non-sterile for in-clinic steam sterilisation.
View
