Bracket Removing Pliers 12.5 cm - Straight
The Bracket Removing Pliers are a specialty orthodontic debonding pliers used at the end of fixed treatment to peel brackets cleanly off the enamel surface. A sharp wedge-profile beak slides under the bracket base along the bonded interface, while the opposing beak carries a firm rounded tip that rests on the opposite wing. Squeezing the handles generates a controlled rolling force that lifts the bracket from the tooth with minimal patient discomfort. This version has a straight head and a long slim neck that give a clear line of sight to anterior teeth and straightforward buccal debonding strokes. The pliers use a rivet-joint pivot with hardened stainless-steel beaks. Equate Instruments supplies this pliers non-sterile, ultrasonically cleaned, and fully autoclavable.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Direct Bond Bracket Remover Plier
The Direct Bond Bracket Remover Plier is an orthodontic debonding instrument with a notched upper beak that engages the bracket wings and a flat lower beak that rests on the occlusal or incisal edge. Closing the handle pivots the bracket off the tooth with minimal enamel stress, preserving the surface for re-bonding or finishing. Forged from stainless steel with a slim spring-return handle, this Equate Instruments plier is fully autoclavable and supplied non-sterile for in-clinic processing between patients.
View
Bracket Remover with Narrow Tip
This orthodontic bracket remover is a precision debonding plier engineered to lift metal and ceramic brackets from the enamel with a controlled shear force. The narrow upper beak slips under the bracket base while the opposing tip rests against the archwire or crown, so the rotational pinch breaks the adhesive bond without loading the adjacent teeth. The long, curved stainless-steel handles close the jaws with minimal operator force and taper outward for a comfortable two-finger grip. Autoclavable and supplied non-sterile, this Equate Instruments plier is made for clinicians who need a narrow-tip remover for tight interbracket spaces and small anterior brackets.
View
Bracket Removing Pliers 12.5 cm - Angled
The Bracket Removing Pliers are a specialty orthodontic debonding pliers used at the end of fixed treatment to peel brackets cleanly off the enamel surface. A sharp wedge-profile beak slides under the bracket base along the bonded interface, while the opposing beak carries a firm rounded tip that rests on the opposite wing. Squeezing the handles generates a controlled rolling force that lifts the bracket from the tooth with minimal patient discomfort. This version has an angled head that improves access and visibility on buccal surfaces of posterior teeth and both horizontal and vertical debonding strokes. The pliers use a rivet-joint pivot with hardened stainless-steel beaks. Equate Instruments supplies this pliers non-sterile, ultrasonically cleaned, and fully autoclavable.
View
Bracket Removing Pliers - Angled T/C Tips 12.5 cm
The Bracket Removing Pliers with angled T/C Tips is a specialty orthodontic debonding pliers engineered to slide a sharp wedge under the mesial or distal edge of a bonded bracket base and lift it off the enamel cleanly. The sharp, narrow beak geometry enters the bracket-to-enamel interface with minimal pressure and with predictable patient comfort. Tungsten-carbide tip inserts resist wear through repeated debonding cycles and keep the wedge edge sharp over long service life. The box-joint head gives precise beak alignment and rigidity, and the contoured stainless-steel handles support both horizontal and vertical application of force. An essential chairside plier for end-of-treatment debonding with this Equate Instruments specialty design.
View
Ceramic Bracket Remover - 45° Angled, 12 cm
The Ceramic Bracket Remover in 45-degree angled pattern is a specialty debonding plier for removing delicate ceramic brackets at end of treatment. Sharp, narrow cutting edges enter the bracket-enamel interface at a controlled angle, directing the debonding force into the adhesive layer rather than the bracket body, which minimises fracture risk on polycrystalline and single-crystal ceramics. Machined from passivated stainless steel with a rivet joint hinge and smoothly contoured 12 cm ergonomic handles, this plier from Equate Instruments is fully autoclavable and retains edge sharpness across repeated steam sterilisation cycles. Supplied non-sterile, ultrasonically cleaned, latex-free, and individually packed, ready for standard in-clinic sterilisation.
View
Angulated Debonding Pliers (TC)
The Angulated Debonding Pliers are orthodontic instruments built for clean, controlled bracket removal at the end of fixed-appliance treatment. The angulated working head lets the clinician line up on the bonding base of each bracket, concentrating shear force at the adhesive interface so the bracket lifts cleanly without unnecessary load on the enamel. A tungsten carbide insert on the occluding jaw holds its edge through many debonding cycles, keeping the action predictable across full-mouth appointments. From Equate Instruments, the plier features slim tapered arms and a smooth spring return for comfort in extended sessions. The body is corrosion-resistant stainless steel, fully autoclavable, and supplied non-sterile for in-clinic sterilisation in the clinician's preferred workflow.
View
Adhesive Removing Pliers (TC)
The Adhesive Removing Pliers are built for post-debond clean-up, lifting residual bonding composite from the enamel without scarring the tooth surface. The plier pairs a white Teflon occlusal pad with a tungsten-carbide scraping tip on the opposing jaw. In use, the Teflon pad seats on the occlusal surface of the tooth while the TC scraper sweeps along the labial or buccal face, shearing adhesive away at the enamel interface. The forged stainless steel body from Equate Instruments is slim and well-balanced for extended chairside sessions, with a smooth spring return between squeezes. It is corrosion-resistant and fully autoclavable, and the working parts are replaceable when worn so the plier stays in service longer. Supplied non-sterile for in-clinic processing.
View
Adhesive Remover Changeable Parts - 5 Sets (Carbide Tip + Teflon Pad)
This pack contains five replacement sets of working parts for orthodontic adhesive removing pliers. Each set includes one tungsten carbide scraping tip and one Teflon occlusal pad, ready to swap into a compatible adhesive-removing plier when the original parts wear or foul with composite residue. Keeping a stock of replacement tips extends the life of the parent instrument and keeps post-debond finishing predictable appointment after appointment. The tungsten carbide tip is machined for consistent edge geometry, while the Teflon pad provides a soft, non-marking stop against the occlusal surface of the tooth during scraping. Parts from Equate Instruments fit standard adhesive removing pliers designed around a snap-in or screw-retained tip interface. Supplied non-sterile for processing in the clinic's preferred workflow.
View
Hammerhead NiTi Cinch Back Pliers 0.64 mm (.025″ Wire)
The Hammerhead NiTi Cinch Back Pliers are built to bend the distal end of NiTi and stainless archwires once they exit the buccal tube. The slim hammerhead working head reaches comfortably to the terminal molar region and places a clean, right-angled bend that stops the wire from sliding anteriorly and protects the patient's soft tissues from sharp ends. Equate Instruments constructs the plier in forged stainless steel with tapered arms, a smooth box-joint pivot, and a balanced spring return. The instrument is rated for round and rectangular archwires up to 0.64 mm (.025″), is corrosion resistant, and is fully autoclavable. It is supplied non-sterile for processing through the clinic's standard sterilisation cycle.
View
Mathieu Orthodontic Ligature Pliers 14 cm
The Mathieu Orthodontic Ligature Pliers are a spring-loaded, ratcheted instrument for placing and twisting stainless ligature wire around orthodontic brackets. A serrated narrow working tip grips the wire end firmly, while the internal ratchet lets the clinician set and hold the grip without maintaining finger pressure. The teardrop-shaped handle with an internal leaf spring gives a light, self-opening action and excellent tactile feedback during fine ligation. From Equate Instruments, the 14 cm stainless steel body is corrosion resistant, fully autoclavable, and balanced for the extended chairside use typical of full-arch ligation. Supplied non-sterile for processing in the clinic's usual sterilisation workflow.
View
Mathieu Narrow-Tip Ligature Pliers 14 cm
The Mathieu Narrow-Tip Ligature Pliers are a spring-loaded, ratcheted instrument for placing and twisting stainless ligature wire around orthodontic brackets. The slim serrated working tip grips the ligature tail firmly, and the internal ratchet locks the jaws closed under tension so the clinician does not need to maintain finger pressure while twisting. The teardrop-shaped handle with a leaf-spring interior gives a light, self-opening action and good tactile feedback. From Equate Instruments, the 14 cm narrow-tip body is forged stainless steel, balanced for long ligation sessions, corrosion resistant, and fully autoclavable. Supplied non-sterile so the clinic can process it through its usual sterilisation workflow.
View
Direct Bond Remover - Wide Tungsten Carbide
This direct-bond remover is a wide-beak orthodontic debonding plier with tungsten-carbide working inserts that grip the bracket wings and peel the bonded pad cleanly off the enamel. The wide upper cushion and flat lower anvil cradle the bracket fully, spreading the load across the pad so the adhesive releases in a single controlled motion. Long curved stainless-steel handles with polished tungsten-carbide grip surfaces close the jaws with low operator effort and resist the repeated wear of debonding cycles. Autoclavable and supplied non-sterile, this Equate Instruments plier is made for efficient end-of-treatment bracket removal on metal brackets with wide-base pads.
View
