Bracket Holding Tweezers 12 cm
Bracket Holding Tweezers are slim orthodontic tweezers with a pair of fine angled tips shaped to capture the base of a bracket during bonding. The angled bend gives line-of-sight approach to anterior and posterior teeth without the tweezer body obscuring the working field, and the thin jaw profile stays out of the way of the curing light. The 12 cm stainless steel body from Equate Instruments is autoclavable, corrosion resistant, and weighted for fine-motor control. Supplied non-sterile for processing in the clinic's preferred sterilisation workflow, and rated for repeated chairside use across bonding, bracket repositioning, and debonding appointments.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Bracket Positioning Tweezer 12 cm
The Bracket Positioning Tweezer is a 12 cm stainless-steel orthodontic tweezer designed to pick up, orient, and seat brackets during direct-bonding procedures. A fine hooked notch at the working tip engages the bracket slot or tie-wing and holds the bracket firmly while the clinician seats the adhesive base on the tooth surface and fine-tunes the mesiodistal and vertical position before cure. The shanks are fully satin-finished to reduce glare under the operating light and the grip zone is contoured for precise fingertip control. Equate Instruments supplies this tweezer non-sterile in autoclavable stainless steel for routine in-clinic sterilisation alongside the rest of the bonding setup.
View
Bracket Placing Tweezers 13 cm
Bracket Placing Tweezers are slim 13 cm orthodontic tweezers with a pair of fine, angled tips shaped for accurate bracket pickup and seating. The angled bend gives clear line of sight to the tooth face during both direct and indirect bonding, and the narrow jaw profile keeps the tweezer body out of the curing-light path while the resin sets. Manufactured by Equate Instruments in forged stainless steel, the body is light, balanced, and tapered for fine-motor control. It is corrosion resistant, fully autoclavable, and supplied non-sterile so the clinic can process it through its normal sterilisation workflow. Suitable for bonding, bracket repositioning, and chairside tray handling.
View
Bracket Positioning Tweezer 12 cm
The Bracket Positioning Tweezer is a 12 cm stainless-steel orthodontic tweezer designed to pick up, orient, and seat brackets during direct-bonding procedures. A fine hooked notch at the working tip engages the bracket slot or tie-wing and holds the bracket firmly while the clinician seats the adhesive base on the tooth surface and fine-tunes the mesiodistal and vertical position before cure. The shanks are fully satin-finished to reduce glare under the operating light and the grip zone is contoured for precise fingertip control. Equate Instruments supplies this tweezer non-sterile in autoclavable stainless steel for routine in-clinic sterilisation alongside the rest of the bonding setup.
View
Deluxe Bracket Holder Tweezer 12 cm
The Deluxe Bracket Holder is a 12 cm orthodontic tweezer designed to seat and orient metal and ceramic brackets during adhesive bonding. A cut-out window in the arm keeps the assistant's view on the bracket base while a small hooked tip engages the bracket's wing, so adhesive thickness and mesio-distal rotation can be controlled precisely before light-cure. The flat spring-tempered stainless-steel arms give consistent closure force across bonding appointments, and the satin finish limits reflection under the operatory light. Equate Instruments supplies the holder non-sterile for in-clinic steam sterilisation.
View
Bracket Holding Tweezers Serrated Extra-Long 16cm
These bracket holding tweezers are extra-long orthodontic tweezers with angled serrated tips, patterned for the accurate seating and repositioning of ceramic and metal brackets during bonding. The angled beaks approach the bracket base at the ideal angle for the buccal surface of posterior teeth, and the fine serrations inside the tip hold the bracket securely without crushing ceramic wings. The 16 cm extra-long body reaches into the posterior oral cavity without the operator's fingers obscuring the bonding site, and fluting along the shaft gives a stable pencil grip during fine positioning. Equate Instruments supplies the tweezers forged in passivated stainless steel, fully autoclavable, and delivered non-sterile.
View
Bonding Tweezers - 11.5 cm Cross Action
The Bonding Tweezers in cross-action pattern are an 11.5 cm orthodontic instrument for picking up, orienting, and positioning brackets during direct bonding. The cross-action mechanism means the tips close at rest and open only when the clinician squeezes, so the bracket is gripped securely without continuous finger pressure. A thin 0.025 inch plate on the rear of one tip cradles the bracket base. Machined from solid stainless steel with mirror-polished working surfaces, this tweezer from Equate Instruments is fully autoclavable, ultrasonically cleaned, and latex-free. Supplied non-sterile and individually packed, ready for standard in-clinic sterilisation.
View
Bonding Tweezers - 14 cm Heavy, Cross Action
The Heavy Bonding Tweezers in cross-action pattern are a 14 cm orthodontic instrument with a heavier body for clinicians who prefer a substantial feel during bracket placement. The cross-action mechanism closes the tips at rest and opens only under squeeze pressure, so the bracket stays locked in the tips while the operator orients, presses, and light-cures without continuous finger tension. Machined from solid stainless steel with mirror-polished working surfaces, this tweezer from Equate Instruments is fully autoclavable, ultrasonically cleaned, and latex-free. Supplied non-sterile and individually packed, ready for standard in-clinic sterilisation.
View
Bracket Placer & Slot Aligner Tweezers
The Bracket Placer and Slot Aligner Tweezers is a cross-action orthodontic tweezer that combines two functions in one instrument. One tip cradles the bracket base for positioning on adhesive-loaded enamel, while the opposing face carries a narrow tang that engages the bracket slot to verify alignment with the archwire axis, so the bracket is seated both in the right location and at the right angulation. Machined from solid stainless steel with mirror-polished working surfaces, this tweezer from Equate Instruments is fully autoclavable, ultrasonically cleaned, and latex-free. Supplied non-sterile and individually packed, ready for standard in-clinic sterilisation.
View
Improved Bonding Tweezers - 13 cm, Cross Action
The Improved Bonding Tweezers in cross-action pattern are a 13 cm orthodontic instrument built with a refined tip geometry and a thin 0.025 inch plate on the rear face of one tip. The cross-action mechanism closes the tips at rest and opens only when the clinician squeezes, keeping the bracket locked during positioning, pressing, and light-cure without continuous finger tension. Machined from solid stainless steel with mirror-polished working surfaces, this tweezer from Equate Instruments is fully autoclavable, ultrasonically cleaned, and latex-free. Supplied non-sterile and individually packed, ready for standard in-clinic sterilisation.
View
Keat Buccal Tube Tweezers
The Keat Buccal Tube Tweezers is a long-shanked orthodontic tweezer designed to deliver buccal tubes and molar attachments into posterior zones. Slim curved tips reach past second molars without being blocked by the cheek, while the fine working surfaces cradle the tube base for accurate positioning on adhesive-loaded enamel. Machined from solid stainless steel with mirror-polished working surfaces, this tweezer from Equate Instruments is fully autoclavable, ultrasonically cleaned, and latex-free. Supplied non-sterile and individually packed, ready for standard in-clinic sterilisation.
View
Buccal Tube Tweezers - Cross Action
The Buccal Tube Tweezers in cross-action pattern is an orthodontic instrument for delivering and holding buccal tubes during direct molar bonding. The cross-action mechanism closes the tips at rest and opens only under squeeze pressure, so the tube stays locked in the tips while the clinician positions, presses, and light-cures without continuous finger tension. The slim curved tip reaches past the cheek into the posterior arch. Machined from solid stainless steel with mirror-polished working surfaces, this tweezer from Equate Instruments is fully autoclavable, ultrasonically cleaned, and latex-free. Supplied non-sterile and individually packed, ready for standard in-clinic sterilisation.
View
Buccal Tube Tweezers - Cross Action with Slot Aligner
The Buccal Tube Tweezers in cross-action pattern with slot aligner is an orthodontic instrument that combines hands-free buccal tube delivery with a slot-engaging alignment feature. The cross-action tips hold the tube securely at rest, while a narrow tang on the opposing face engages the tube slot to verify angulation with the archwire axis before the adhesive is cured. Machined from solid stainless steel with mirror-polished working surfaces, this tweezer from Equate Instruments is fully autoclavable, ultrasonically cleaned, and latex-free. Supplied non-sterile and individually packed, ready for standard in-clinic sterilisation.
View
