Straight Convex Osteotome Set of 5 (2.0-4.9 mm)
This straight-shaft convex osteotome set contains five instruments in graduated tip diameters of 2.0, 2.7, 3.2, 4.1, and 4.9 mm for progressive ridge expansion and implant osteotomy widening in the posterior maxilla and mandible. Depth marks at 10, 12, 14, 16, and 18 mm give the surgeon a consistent visual reference for working length during site preparation. Each instrument features a solid stainless-steel shaft, a knurled pistol-grip collar, and a textured body for controlled mallet tapping. The set is delivered in a padded, instruction-printed presentation case with shaped cut-outs that keep the tips protected during transport and reprocessing. Equate Instruments supplies the set non-sterile and fully autoclavable.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Straight Bone Condenser Set with Cassette and Mallet
This straight bone condenser kit is built for implant site preparation and sinus-lift work where sequential bone condensation is preferred to drilling. Each osteotome in the set tapers up from the tip in staged diameters, so the working end of one instrument seats into the site prepared by the previous one - a depth-gauged progression that expands the osteotomy while compacting the cancellous bone around the future implant. Supplied by Equate Instruments in a stainless-steel sterilisation cassette with a dedicated mallet, the set is colour-coded for fast identification during surgery. Stainless-steel construction throughout, fully autoclavable and reusable across cases.
View
Offset Bone Condenser Osteotome Set - 8, 10, 13, 15, 18 mm
The Offset Bone Condenser Osteotome Set brings together five angled bone-condensing osteotomes in graduated diameters from 8 mm to 18 mm, supplied in a stainless-steel sterilisation cassette. The set is sized so each instrument prepares the socket that the next larger condenser will refine, allowing controlled ridge expansion and bone compaction for implant placement in the posterior maxilla and anatomically challenging sites. Each osteotome features an angled shank for access to posterior quadrants where a straight-shaft instrument cannot reach without impinging on opposing teeth. The tips are machined from autoclavable stainless steel and the handles are colour-coded for rapid selection during surgery. The included cassette keeps the working ends protected during cleaning and steam sterilisation. Supplied non-sterile for in-clinic processing.
View
Offset Osteotome Complete Universal Set with Mallet and Cassette
The Offset Osteotome Complete Universal Set groups a graduated range of angled bone-condensing osteotomes with a matching surgical mallet in a perforated stainless-steel sterilisation cassette. The offset shanks give the surgeon direct access to posterior quadrants where straight osteotomes would impinge on opposing dentition, making the kit particularly useful for site preparation in the maxillary molar region and indirect sinus lifting. Each osteotome is machined from autoclavable stainless steel and carries a colour identification collar so sizes can be selected quickly during surgery. The hollow knurled handles reduce overall mass without sacrificing grip, and the cassette holds every instrument securely through cleaning, washer-disinfector cycles, and steam sterilisation. Supplied by Equate Instruments non-sterile for in-clinic processing.
View
Straight Osteotome Complete Set with Mallet and Cassette
The Straight Osteotome Complete Set delivers a graduated range of straight bone-condensing osteotomes with a matching surgical mallet, arranged in a perforated stainless-steel sterilisation cassette. Each osteotome is sized so that the tip of the next larger instrument fits the socket created by the previous size, giving the surgeon reliable depth gauging and a smooth progression through common implant lengths. The straight shafts carry laser-etched depth markings and colour-identification collars for fast intra-operative size selection. Machined by Equate Instruments from autoclavable stainless steel with hollow knurled handles, the set supports daily implant surgery, ridge preparation, and indirect sinus-lift procedures. The cassette protects the working tips during washer-disinfector cycles and steam sterilisation. Supplied non-sterile for in-clinic processing.
View
Curved Convex Osteotome Set of 5 (2.0-4.9 mm)
This curved-shaft convex osteotome set contains five instruments in graduated tip diameters of 2.0, 2.7, 3.2, 4.1, and 4.9 mm for progressive ridge expansion and implant osteotomy widening in anatomically angulated sites, particularly the posterior maxilla where the sinus floor sits palatally to the ridge. Depth marks at 10, 12, 14, 16, and 18 mm give the surgeon a consistent visual reference for working length during site preparation. Each instrument features a gently bent stainless-steel shaft, a knurled pistol-grip collar, and a textured body for controlled mallet tapping. The set is delivered in a padded, instruction-printed presentation case with shaped cut-outs that keep the tips protected during transport and reprocessing. Equate Instruments supplies the set non-sterile and fully autoclavable.
View
Curved Concave Osteotome Set of 5 (2.0-4.9 mm)
This curved-shaft concave osteotome set contains five instruments in graduated tip diameters of 2.0, 2.7, 3.2, 4.1, and 4.9 mm for sinus floor elevation and internal lift in the posterior maxilla. The concave, cup-shaped working end captures bone during the controlled fracture of the sinus floor, keeping particulate contained as the Schneiderian membrane is elevated. Depth marks at 10, 12, 14, 16, and 18 mm give the surgeon a consistent visual reference during site preparation. Each instrument features a gently bent stainless-steel shaft, a knurled pistol-grip collar, and a textured body for controlled mallet tapping. The set is delivered in a padded, instruction-printed presentation case with shaped cut-outs that keep the tips protected during transport and reprocessing. Equate Instruments supplies the set non-sterile and fully autoclavable.
View
Straight Concave Osteotome Set of 5 (2.0-4.9 mm)
This straight-shaft concave osteotome set contains five instruments in graduated tip diameters of 2.0, 2.7, 3.2, 4.1, and 4.9 mm for direct-line internal sinus lift and ridge compression in the posterior maxilla. The concave, cup-shaped working end captures bone during the controlled fracture of the sinus floor, keeping particulate contained as the Schneiderian membrane is elevated. Depth marks at 10, 12, 14, 16, and 18 mm give the surgeon a consistent visual reference during site preparation. Each instrument features a solid stainless-steel shaft, a knurled pistol-grip collar, and a textured body for controlled mallet tapping. The set is delivered in a padded, instruction-printed presentation case with shaped cut-outs that keep the tips protected during transport and reprocessing. Equate Instruments supplies the set non-sterile and fully autoclavable.
View
Miller 8 Bone Curette - 3.5 mm
The Miller 8 Bone Curette from Equate Instruments is a double-ended dental surgical curette designed for extraction-socket debridement, removal of cystic or granulomatous tissue and general intra-oral bone curettage. Matching 3.5 mm spoon-shaped working ends on long, offset necks give straightforward access to posterior sockets and hard-to-reach alveolar recesses. The lightweight hollow stainless-steel handle, finished with a titanium-coloured striped grip, reduces hand fatigue during extended extraction sessions. Working ends are titanium coated for visibility against bone and soft tissue and to support extended edge retention. Supplied non-sterile, the instrument is fully autoclavable for routine steam sterilisation and suitable for oral surgery, periodontics and general-practice extraction work.
View
Round Scalpel Handle - Straight Standard
This straight round scalpel handle accepts standard surgical scalpel blades and is used to make precise incisions in soft tissue during oral surgery, periodontal flap design, and biopsy procedures. The round cross-section lets the clinician rotate the blade smoothly between fingertip and pen grip positions for controlled direction changes along an incision line. The handle is fabricated from stainless steel with a knurled mid-section that resists slippage when gloves are wet. A tapered lower body balances the instrument in hand. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
View
Round Scalpel Handle 170 mm - Adjustable Blade Mount
This 170 mm round scalpel handle features an adjustable threaded blade mount that secures standard surgical scalpel blades at a firm, consistent angle for palatal and posterior incisions. Its extended length improves reach into the back of the oral cavity while the round body supports precise rotational control between fingertip and pen grip positions. The stainless-steel handle is tapered through the lower two-thirds for balance and carries a compact knurled collar near the blade mount for fingertip indexing. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
View
Scalpel Handle No.3 - 130mm
The Scalpel Handle No.3 is a flat 130 mm stainless-steel surgical handle that accepts standard No.10 to No.15 surgical blades. Deep parallel finger ridges on the central section anchor the pen grip and maintain precise control during intraoral flap design, gingival incisions, frenectomies and biopsy work. The slim silhouette and balanced weight keep the blade tip under confident tactile command throughout extended procedures. Crafted from high-grade stainless steel by Equate Instruments, the handle is corrosion-resistant, fully autoclavable and built for long clinical service. Supplied non-sterile for steam sterilisation in pouches or cassettes.
View
Scalpel Handle No.3 with Ruler Scale - 130mm
The Scalpel Handle No.3 with Ruler Scale is a flat 130 mm stainless-steel surgical handle that accepts standard No.10 to No.15 surgical blades. An etched centimetre-millimetre scale runs along the flat of the handle, giving the clinician an immediate chairside reference for measuring incision length, implant-site distances or soft-tissue landmarks without reaching for a separate ruler. A ridged upper section anchors the pen grip for precise control during flap design, gingival incisions and biopsies. Crafted from high-grade stainless steel by Equate Instruments, the handle is corrosion-resistant, fully autoclavable and built for repeat steam sterilisation. Supplied non-sterile for in-clinic processing in pouches or cassettes.
View
