La Grange Serrated Double-Curved Scissors 13.5cm - Titanium Plasma Blue
The Serrated La Grange Scissor is a 13.5 cm double-curved periodontal scissor finished in a distinctive blue plasma titanium coating. One blade carries micro-serrations that grip soft tissue and suture material to prevent slippage during close cuts on gingival margins, papillae, and interproximal flaps. The shorter 13.5 cm body gives firmer tactile feedback than the 14 cm pattern, and the offset shank maintains a clear sight line in the posterior mouth. Titanium construction is lightweight and corrosion-resistant, fully autoclavable and supplied non-sterile for in-clinic reprocessing.
Specifications
MaterialTitaniumRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Barraquer Suture and Gingiva Scissor TC
The Barraquer Suture and Gingiva Scissor TC is a spring-action microsurgical scissor with fine pointed blades and tungsten carbide (TC) cutting inserts, purpose-built for cutting dental sutures and trimming gingival tissue with minimal trauma. The squeeze-release spring drives the blades through a short, controlled travel, and the diamond-textured grips give a secure pinch hold throughout extended procedures. Equate Instruments manufactures this scissor from surgical-grade stainless steel with a gold-anodised spring that flags the tungsten carbide cutting edges at a glance on the surgical tray. The compact form factor sits naturally under loupes or a surgical microscope and suits periodontal plastic surgery, microsurgical suturing, and fine gingival refinement. It is fully autoclavable and supplied non-sterile for standard in-clinic processing.
View
Dean Gum Scissors Double-Curved 17cm
The Dean Gum Scissor is a classic double-curved (S-curved) scissor used for suture removal and soft-tissue trimming deep in the posterior mouth. Its 17 cm length reaches to molar regions while the stepped shank keeps the blades clear of the teeth and cheeks, allowing the clinician to keep a direct line of sight on the cut. Forged from surgical-grade stainless steel, the Dean pattern is fully autoclavable and supplied non-sterile for in-clinic reprocessing. Slim blades taper to a fine point for precise snips on gingival tissue, sutures, and periodontal flaps during surgery and recall appointments.
View
Dean TC Gum Scissors Double-Curved 17cm Gold
The TC Dean Gum Scissor is a 17 cm double-curved (S-curved) scissor fitted with tungsten-carbide cutting inserts, indicated by its gold-finished ring handle. The TC inserts hold a keen edge longer than plain stainless, making this pattern a long-life choice for high-volume periodontal offices performing frequent suture removal and soft-tissue trimming in the posterior mouth. Forged from surgical-grade stainless steel with brazed TC inserts, it is fully autoclavable and supplied non-sterile for in-clinic reprocessing. The stepped shank preserves a clear line of sight over molars during posterior cuts.
View
Dean Serrated Double-Curved Scissors 13.5cm - Titanium Plasma Blue
The Serrated Dean Scissor is a 13.5 cm S-curved (double-curved) gum scissor finished in a distinctive blue plasma titanium coating. One blade carries micro-serrations that grip tissue and suture material, preventing slip during delicate cuts on gingival margins, papillae, and periodontal flaps. Its shorter 13.5 cm length gives firmer tactile feedback than the 17 cm pattern, and the offset shank maintains a clear line of sight over the teeth in posterior work. Titanium construction delivers a lightweight body with excellent corrosion resistance, and the instrument is fully autoclavable and supplied non-sterile for in-clinic reprocessing.
View
La Grange Double-Curved Scissors 14cm
The La Grange Scissor is a 14 cm double-curved (S-curved) periodontal scissor with slim blades and fine pointed tips, designed for precise soft-tissue work deep in the mouth. The signature S-curve keeps the handles clear of the teeth and cheeks while the tip retains a direct line of sight to the cut. It is a reliable chairside instrument for gingivectomy refinement, papilla contouring, and suture removal in posterior regions. Forged from surgical-grade stainless steel, it is fully autoclavable and supplied non-sterile for in-clinic reprocessing.
View
Goldman-Fox Serrated Double-Curved Scissors 13.5cm - Titanium Plasma Blue
The Serrated Goldman-Fox Scissor is a 13.5 cm double-curved (S-curved) periodontal scissor with micro-serrated blades and fine pointed tips, finished in blue plasma titanium. The Goldman-Fox pattern is a classic for gingivectomy, papilla contouring, and periodontal flap work, and the serrations keep soft tissue and suture material from slipping during close cuts. Titanium construction keeps the instrument lightweight and corrosion-resistant, and the plasma-blue finish is easy to spot on a crowded tray. Fully autoclavable and supplied non-sterile for in-clinic reprocessing.
View
Goldman-Fox Scissors Double Curved 13cm
The Goldman-Fox scissors are fine-pointed double-curved gum scissors patterned for gingivectomy, tissue trimming, and the shaping of interdental papillae. The slender blades curve on edge and are ground to sharp points so the cutting plane can follow the gingival architecture without lifting off the tissue, a standard requirement in aesthetic soft-tissue contouring. At 13 cm overall, the scissors balance well in a pencil grip or ring-handle grip, and the small bow rings suit both adult and smaller hands. Equate Instruments supplies the instrument forged in stainless steel, fully autoclavable, and delivered non-sterile for routine in-clinic reprocessing.
View
LaGrange TC Suture Scissors Curved - 11 cm
The LaGrange TC Suture Scissors Curved is an 11 cm intraoral suture scissor with a double-curved blade profile and tungsten carbide cutting inserts brazed into the blade edges. The sharp curved beak follows the arch of the palate or the curve of a posterior flap so the operator can trim sutures and fine tissue at a natural hand angle, and the TC inserts hold their edge through repeated autoclave cycles far longer than plain stainless blades. Gold-plated ring handles flag the TC variant at a glance across a tray. This Equate Instruments scissor is supplied non-sterile and is fully autoclavable for in-clinic steam sterilisation.
View
LaGrange Double-Curved Suture Scissors - 11.5 cm
The LaGrange Double-Curved Suture Scissors is an 11.5 cm intraoral scissor with a distinctive S-curve blade that sweeps past the shaft so the tip can reach over tissue without the operator's hand blocking the surgical site. The fine pointed beak cuts sutures flush to the knot and trims delicate gingival margins during periodontal flap surgery. Ring handles and a balanced finger-ball pivot give predictable two-finger control, and the corrosion-resistant stainless steel body is fully autoclavable between patients. This Equate Instruments scissor is supplied non-sterile for in-clinic steam sterilisation in pouches or cassettes.
View
LaGrange TC Suture Scissors - Black Coated
The LaGrange TC Suture Scissors with Black Coating is a double-curved intraoral scissor fitted with tungsten carbide cutting inserts and finished with a low-reflectivity black coating over the stainless steel body. The black surface cuts operating-light glare at the surgical field, and the tungsten carbide inserts hold their edge far longer than plain stainless blades through repeated autoclave cycles. The S-curve blade follows the palatal arch and posterior flap contour so the operator can trim sutures flush and clean gingival margins without obstructing the line of sight. This Equate Instruments scissor is supplied non-sterile and is fully autoclavable for in-clinic steam sterilisation.
View
Iris TC Scissors Curved - 11.5 cm
The Iris TC Scissors Curved is an 11.5 cm fine-bladed surgical scissor with tungsten carbide cutting inserts and gold-plated ring handles that identify the TC variant at a glance. The short pointed blades curve gently to follow tissue planes so the operator can trim fine soft tissue, free adhesions, and shorten suture tags in confined intraoral sites. The tungsten carbide inserts hold a sharp edge through repeated autoclave cycles far longer than plain stainless blades, and the corrosion-resistant body is fully autoclavable between patients. This Equate Instruments scissor is supplied non-sterile for in-clinic steam sterilisation.
View
Iris TC Scissors Straight - 11.5 cm
The Iris TC Scissors Straight is an 11.5 cm fine-bladed surgical scissor with tungsten carbide cutting inserts and gold-plated ring handles. Short straight pointed blades follow a straight line of cut into soft tissue, making them suited to suture trimming, fine tissue cutting, and freeing adhesions where a curved blade would follow the wrong plane. The tungsten carbide cutting inserts hold a sharp edge far longer than plain stainless blades, and the gold handles identify the TC variant on a busy instrument tray. This Equate Instruments scissor is machined from corrosion-resistant stainless steel and is fully autoclavable for in-clinic steam sterilisation.
View
