Curved Long-Tip Bone Chisel - 7.5mm
This long-tip curved bone chisel is engineered for controlled ridge splitting, sinus floor preparation, and bone augmentation during implant surgery. The slender curved working tip follows the contour of the alveolar crest, while the elongated tapered shank provides direct posterior access without crowding adjacent teeth. The knurled mid-section stabilises hand placement under mallet percussion. Machined from medical-grade stainless steel by Equate Instruments, the chisel accepts controlled tapping from a surgical hammer at the end-cap head. It is fully autoclavable for standard steam sterilisation and designed for reuse across routine implant and ridge-augmentation workflows.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Curved Long-Tip Bone Chisel - 3.8mm
This long-tip curved bone chisel is engineered for controlled ridge splitting, sinus floor preparation, and bone augmentation during implant surgery. The slender curved working tip follows the contour of the alveolar crest, while the elongated tapered shank provides direct posterior access without crowding adjacent teeth. The knurled mid-section stabilises hand placement under mallet percussion. Machined from medical-grade stainless steel by Equate Instruments, the chisel accepts controlled tapping from a surgical hammer at the end-cap head. It is fully autoclavable for standard steam sterilisation and designed for reuse across routine implant and ridge-augmentation workflows.
View
Rhodes Back-Action Chisel 36/37 - Solid Handle 6mm
The Rhodes Back-Action Chisel 36/37 is a double-ended osseous surgery instrument whose curved shanks direct the cutting stroke back toward the operator, making it the tool of choice for interproximal bone trimming where a push stroke is restricted. The two mirrored working ends address bone on opposite line angles, reducing the need for instrument changes mid-procedure. The chisel is crafted from stainless steel with a 6 mm knurled solid handle for balanced back-action pull strokes. Fully autoclavable and supplied non-sterile by Equate Instruments, it is ready for steam sterilisation in pouches or cassettes.
View
Partsch Grooved Bone Chisel 14 cm x 3 mm
The Partsch Grooved Bone Chisel is a classic osteotomy instrument with a concave working edge designed for shaping rounded bone contours and scooping fine bone chips during oral-surgical procedures. The one-piece stainless-steel body tapers from the grooved cutting edge into a ribbed mid-body grip that locks into the surgeon's palm for secure alignment during mallet-driven strikes, while the concave tip profile helps collect bone fragments for grafting. Forged from high-grade stainless steel and fully autoclavable, the chisel is built for repeated sterilisation cycles and routine theatre use. Equate Instruments supplies this Partsch Grooved non-sterile for in-clinic processing, making it a dependable osteotomy instrument for oral surgeons performing osseous recontouring, alveoloplasty, and concave bone-window preparation.
View
Partsch Grooved Bone Chisel 14 cm x 4 mm
The Partsch Grooved Bone Chisel is a classic osteotomy instrument with a concave working edge designed for shaping rounded bone contours and scooping fine bone chips during oral-surgical procedures. The one-piece stainless-steel body tapers from the grooved cutting edge into a ribbed mid-body grip that locks into the surgeon's palm for secure alignment during mallet-driven strikes, while the concave tip profile helps collect bone fragments for grafting. Forged from high-grade stainless steel and fully autoclavable, the chisel is built for repeated sterilisation cycles and routine theatre use. Equate Instruments supplies this Partsch Grooved non-sterile for in-clinic processing, making it a dependable osteotomy instrument for oral surgeons performing osseous recontouring, alveoloplasty, and concave bone-window preparation.
View
Scaler Chisel - Anatomical Hollow Handle 10 mm
The Scaler Chisel is a double-ended periodontal surgical chisel with small angled blade tips designed for controlled removal of interproximal bone irregularities and fine osseous reshaping during periodontal flap surgery. The bent working ends approach from buccal and lingual sides without changing grip, and the compact blade width keeps bone removal conservative and predictable. The 10 mm anatomical hollow handle carries a knurled profile that provides a confident wet grip during precise push-pull strokes. Machined from corrosion-resistant stainless steel, the chisel is fully autoclavable and supplied non-sterile by Equate Instruments for in-clinic sterilisation.
View
13KL Surgical Chisel - Anatomical Hollow Handle 10 mm
The 13KL Surgical Chisel is a double-ended instrument combining a curved angled chisel blade for fine bone shaping and periodontal osseous recontouring on one end with a flat spade-shaped working end for smoothing and finishing the reshaped bony margin on the other. The combination gives the operator two complementary working geometries on a single instrument change, which streamlines fine osseous surgery. The 10 mm anatomical hollow handle is knurled along its length for a steady wet grip and reduced hand fatigue during lengthy periodontal or implant-adjacent procedures. Machined from corrosion-resistant stainless steel, the chisel is fully autoclavable and supplied non-sterile by Equate Instruments for in-clinic sterilisation.
View
Bone Chisel Left Curved 5 mm
The 5 mm Left Curved Bone Chisel is a single-ended oral-surgery instrument angled to the left of the handle axis for bone removal in positions where a straight chisel cannot gain direct access. The 5 mm curved blade allows the surgeon to work around anatomical obstacles and approach cortical plates, sockets or ridges from the patient's left side with controlled mallet force. The chisel is machined from high-grade stainless steel by Equate Instruments with a ribbed hollow handle for a balanced, fatigue-free grip and secure purchase when wet or gloved. Supplied non-sterile, it is fully autoclavable for steam sterilisation and is typically paired with the matching right-curved variant to cover both sides of the arch.
View
Bone Chisel Right Curved 5 mm
The 5 mm Right Curved Bone Chisel is a single-ended oral-surgery instrument angled to the right of the handle axis for bone removal in positions where a straight chisel cannot gain direct access. The 5 mm curved blade allows the surgeon to work around anatomical obstacles and approach cortical plates, sockets or ridges from the patient's right side with controlled mallet force. The chisel is machined from high-grade stainless steel by Equate Instruments with a ribbed hollow handle for a balanced, fatigue-free grip and secure purchase when wet or gloved. Supplied non-sterile, it is fully autoclavable for steam sterilisation and is typically paired with the matching left-curved variant to cover both sides of the arch.
View
Bone Chisel Double Cut 3 mm
This double-cut bone chisel is a surgical osteotomy instrument designed for controlled bone removal, ridge preparation, and implant-site shaping. The stainless-steel blade carries a symmetrical cutting edge beveled on both sides for balanced bidirectional chiselling, while the ribbed cylindrical grip pairs with a surgical mallet to transmit measured percussive force through the long axis of the instrument. Depth graduations etched onto the working end give intra-operative reference during ridge expansion and osteotomy. Forged from high-grade stainless steel and fully autoclavable, this chisel is built for repeated sterilisation cycles and routine clinical loading. Equate Instruments supplies it non-sterile for in-clinic steam processing, making it a dependable instrument for oral surgeons and implantologists performing bone augmentation, sinus-lift access, and implant-site preparation.
View
Bone Chisel Double Cut 6 mm
This double-cut bone chisel is a surgical osteotomy instrument designed for controlled bone removal, ridge preparation, and implant-site shaping. The stainless-steel blade carries a symmetrical cutting edge beveled on both sides for balanced bidirectional chiselling, while the ribbed cylindrical grip pairs with a surgical mallet to transmit measured percussive force through the long axis of the instrument. Depth graduations etched onto the working end give intra-operative reference during ridge expansion and osteotomy. Forged from high-grade stainless steel and fully autoclavable, this chisel is built for repeated sterilisation cycles and routine clinical loading. Equate Instruments supplies it non-sterile for in-clinic steam processing, making it a dependable instrument for oral surgeons and implantologists performing bone augmentation, sinus-lift access, and implant-site preparation.
View
Ochsenbein N.3 Bone Chisel - Solid Handle 6mm
The Ochsenbein N.3 is a double-ended osseous surgery chisel used to reshape interproximal bone and eliminate osseous craters during periodontal flap procedures. Its offset angled blades allow the clinician to approach the bony surface from either a mesial or distal direction, delivering controlled push strokes that refine the alveolar architecture. The instrument is crafted from stainless steel with a 6 mm knurled solid handle for balanced finger-thumb control during precision ostectomy and osteoplasty. Supplied non-sterile by Equate Instruments, it is fully autoclavable and compatible with standard pouch or cassette sterilisation workflows.
View
Ochsenbein N.4 Bone Chisel 2.2mm - Solid Handle 6mm
The Ochsenbein N.4 is a double-ended periodontal bone chisel with the classic Ochsenbein offset geometry and a slightly wider 2.2 mm cutting edge for more substantial bone removal during osseous surgery. The mirrored angled blades reach interproximal bone from either a mesial or distal direction, giving the clinician predictable access for ostectomy and osteoplasty. The chisel is crafted from stainless steel and paired with a 6 mm knurled solid handle for balanced control during push-stroke bone reshaping. Supplied non-sterile and fully autoclavable, it is offered by Equate Instruments for pouch or cassette sterilisation.
View
