Bone Mill - Large
The Large Bone Mill is a heavy-duty surgical grinder used to process autogenous bone blocks into fine particulate graft material at the point of care. The stainless-steel cylindrical chamber accepts cortical or cancellous bone, and the T-bar knurled crank drives a cutting insert through the material to produce consistent shavings suitable for packing into extraction sockets, peri-implant defects or sinus-lift sites. A knurled locking collar secures the mechanism during grinding, and the generous chamber capacity lets the surgeon process larger harvests in a single pass. Machined from high-grade stainless steel by Equate Instruments, the mill is fully autoclavable and disassembles for thorough cleaning between cases. Supplied non-sterile for standard in-clinic sterilisation.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Bone Mill Small
The Bone Mill Small is a hand-operated surgical mill used to reduce autogenous bone blocks and cortical chips into fine particulate graft for immediate placement at the recipient site. A screw-down milling mechanism shears harvested bone against the internal chamber to produce uniformly sized particles ideal for ridge augmentation, sinus lift grafting, and socket preservation. The compact chamber is machined from stainless steel and topped with a knurled pressure cap, while the cross T-handle gives the clinician positive leverage during milling. Fully dismountable for thorough cleaning, the mill is autoclavable and forms part of the Equate Instruments implantology set.
View
Bone Mill Small
The Bone Mill Small is a hand-operated surgical mill used to reduce autogenous bone blocks and cortical chips into fine particulate graft for immediate placement at the recipient site. A screw-down milling mechanism shears harvested bone against the internal chamber to produce uniformly sized particles ideal for ridge augmentation, sinus lift grafting, and socket preservation. The compact stainless-steel chamber is topped with a contoured polymer pressure cap, while the polymer-sleeved T-handle gives the clinician positive leverage with a comfortable grip during milling. Fully dismountable for thorough cleaning, the mill is autoclavable and forms part of the Equate Instruments implantology set.
View
Bone Mill Selector Turret
The Bone Mill Selector Turret is an accessory component within the matching bone-mill system, letting the surgeon dial in calibrated cutting-head positions so the mill produces a consistent particulate size during autogenous graft preparation. The blue anodized selector drum carries graduated numeric indicators and rotates on a stainless-steel shaft, while the knurled silver barrel at the opposite end provides a firm grip for changing settings between passes. Machined from a combination of anodized aluminium alloy and stainless steel by Equate Instruments, the turret is fully autoclavable and disassembles alongside the bone mill for cleaning. Supplied non-sterile and engineered to integrate with the matching bone-mill chamber and crank handle as part of a complete chairside grinding setup.
View
Miller 8 Bone Curette - 3.5 mm
The Miller 8 Bone Curette from Equate Instruments is a double-ended dental surgical curette designed for extraction-socket debridement, removal of cystic or granulomatous tissue and general intra-oral bone curettage. Matching 3.5 mm spoon-shaped working ends on long, offset necks give straightforward access to posterior sockets and hard-to-reach alveolar recesses. The lightweight hollow stainless-steel handle, finished with a titanium-coloured striped grip, reduces hand fatigue during extended extraction sessions. Working ends are titanium coated for visibility against bone and soft tissue and to support extended edge retention. Supplied non-sterile, the instrument is fully autoclavable for routine steam sterilisation and suitable for oral surgery, periodontics and general-practice extraction work.
View
Round Scalpel Handle - Straight Standard
This straight round scalpel handle accepts standard surgical scalpel blades and is used to make precise incisions in soft tissue during oral surgery, periodontal flap design, and biopsy procedures. The round cross-section lets the clinician rotate the blade smoothly between fingertip and pen grip positions for controlled direction changes along an incision line. The handle is fabricated from stainless steel with a knurled mid-section that resists slippage when gloves are wet. A tapered lower body balances the instrument in hand. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
View
Round Scalpel Handle 170 mm - Adjustable Blade Mount
This 170 mm round scalpel handle features an adjustable threaded blade mount that secures standard surgical scalpel blades at a firm, consistent angle for palatal and posterior incisions. Its extended length improves reach into the back of the oral cavity while the round body supports precise rotational control between fingertip and pen grip positions. The stainless-steel handle is tapered through the lower two-thirds for balance and carries a compact knurled collar near the blade mount for fingertip indexing. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
View
Scalpel Handle No.3 - 130mm
The Scalpel Handle No.3 is a flat 130 mm stainless-steel surgical handle that accepts standard No.10 to No.15 surgical blades. Deep parallel finger ridges on the central section anchor the pen grip and maintain precise control during intraoral flap design, gingival incisions, frenectomies and biopsy work. The slim silhouette and balanced weight keep the blade tip under confident tactile command throughout extended procedures. Crafted from high-grade stainless steel by Equate Instruments, the handle is corrosion-resistant, fully autoclavable and built for long clinical service. Supplied non-sterile for steam sterilisation in pouches or cassettes.
View
Scalpel Handle No.3 with Ruler Scale - 130mm
The Scalpel Handle No.3 with Ruler Scale is a flat 130 mm stainless-steel surgical handle that accepts standard No.10 to No.15 surgical blades. An etched centimetre-millimetre scale runs along the flat of the handle, giving the clinician an immediate chairside reference for measuring incision length, implant-site distances or soft-tissue landmarks without reaching for a separate ruler. A ridged upper section anchors the pen grip for precise control during flap design, gingival incisions and biopsies. Crafted from high-grade stainless steel by Equate Instruments, the handle is corrosion-resistant, fully autoclavable and built for repeat steam sterilisation. Supplied non-sterile for in-clinic processing in pouches or cassettes.
View
Micro Surgical Periosteal Elevator 2.8/1.8mm - Titanium-Coated
The Micro Surgical Periosteal Elevator 2.8/1.8mm is a double-ended microsurgical flap instrument used to reflect mucoperiosteum from bone with minimal trauma. Its two slim working tips (a broader 2.8 mm end and a finer 1.8 mm end) access tight interdental, papillary and apical regions while preserving soft-tissue integrity. The contours are engineered for precise periosteal lifting during flap surgery, implant exposure and periapical procedures. A titanium nitride-style coating on the blades improves edge stability and cuts glare under operating-light conditions. The knurled handle with colour-banded tactile rings keeps the instrument light in hand during delicate microsurgery. Supplied non-sterile, the elevator is fully autoclavable and belongs in any Equate Instruments micro-surgical flap tray.
View
Hemingway Bone Curette 2.8 mm - Anatomical Hollow Handle
The Hemingway Curette is a double-ended surgical bone curette with opposing spoon-shaped working tips for intra-oral debridement. The shallow concave blades remove granulation tissue, soft bone fragments, and small cyst remnants from extraction sockets and minor osseous defects while leaving vital bone intact. From Equate Instruments, the curette is forged from surgical-grade stainless steel and polished for straightforward cleaning. It is fully autoclavable, supplied non-sterile for in-clinic steam sterilisation, and balanced for extended socket-preparation and cyst-enucleation workflows in oral and implant surgery.
View
Hemingway Bone Curette 3.5 mm - Hollow Handle
The Hemingway Curette is a double-ended surgical bone curette with opposing spoon-shaped working tips for intra-oral debridement. The shallow concave blades remove granulation tissue, soft bone fragments, and small cyst remnants from extraction sockets and minor osseous defects while leaving vital bone intact. From Equate Instruments, the curette is forged from surgical-grade stainless steel and polished for straightforward cleaning. It is fully autoclavable, supplied non-sterile for in-clinic steam sterilisation, and balanced for extended socket-preparation and cyst-enucleation workflows in oral and implant surgery.
View
Miller 8 Surgical Bone Curette - Titanium-Coated Hollow Handle
Miller bone curettes are surgical hand instruments engineered for tooth-socket debridement, cyst enucleation, and alveolar curettage after extraction. The double-ended working tips feature slim spoon-shaped blades ground for controlled removal of granulation tissue and necrotic bone without over-instrumenting the socket walls, while the narrow shank geometry improves access to posterior sites where retromolar visibility is limited. Manufactured by Equate Instruments from surgical-grade stainless steel, this curette is fully autoclavable and supplied non-sterile for in-clinic steam sterilisation. It suits oral surgeons, periodontists, and general dentists performing routine extractions, apicectomies, and minor alveolar surgery.
View
